Native has been installing 18" 180mm (7.25" wide) tires on the front of HD touring models for about 15 years now. Yes, 15 years! Therefore we have the most experience and offer the most complete, most tested, best engineered well thought out fat front tire kit available anywhere.

PLEASE NOTE: We include the NECESSARY custom notched slider covers with our kit and we don't charge extra for chrome or black axle spacers, fender spacers or for any of our fender styles.

This is the ORIGINAL wide front tire kit for 1994-2013 HD touring models! We call it our PRO kit because it is the most comprehensive wide front tire kit we offer. Our Pitbull PRO wide front tire kit allows you to run a 18 inch 180mm (7.25") or 200mm (7.5") wide tire up FRONT and it compliments a 180 or 200mm rear tire perfectly. This kit fits Road Glides, Road Kings and all bat-wing fairing models like Street Glides and Ultra Classics. Your fairing, nacelle or RG gauge housing will bolt up to your new Native trees just like it did to the stock trees because while our trees do spread your forks farther apart, overall they are not any wider than stock trees.


Our Native PRO wide tire kit:
- Allows for installation of the WIDEST TIRE available. (7.5")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that FITS PERFECT EVERY TIME and is the BEST quality available ANYWHERE. Our steel fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such awesome quality.
- Allows you to choose from hundreds of wheel styles that we can supply to you complete with rotors and a bead balanced tire.
- Uses a very common size tire that is readily available around the country.
- DOES NOT require special modified fork legs.


Our standard base price PRO kit includes:
- Extremely strong STOCK RAKE machined finish triple trees that increase the distance between your fork tubes. (chrome or black lower tree available as an option)
- Your choice of any one of our Native brand American made STAMPED STEEL LASER CUT fenders.
- Special raw metal finish SLIDER COVERS which are VERY IMPORTANT and MUST be used with our kit. Chrome or gloss black powder-coat available as an option.
- Special width chrome or gloss black axle spacers are included for NO EXTRA CHARGE. These will hide your wheel bearings!
- Special width chrome of gloss black fender spacers included for NO EXTRA CHARGE!
- Special width axle for stock HD, Arlen Ness or Performance Machine fork legs. (Flush axle with chrome or gloss black end caps is included for stock style fork legs).


Benefits of the PRO kit over our EASY kit are:
- A wider look because the fork legs are spread apart more than stock.
- The PRO fender is not notched like the EASY kit fender is.
- PRO kit allows the use of a 200mm (7.5" wide) tire.


You can choose from our fender styles and 3 finish options in the menus below and you can mix and match finish options. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this PRO kit vs our less expensive EASY kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. This PRO kit includes trees that move the fork legs farther apart (making the front end LOOK wider) so you can run a full sided fender without a notch. Both kits include a 8" wide STAMPED STEEL fender and can accommodate the same 7.25" wide 180mm tire and wheel. This PRO kit will allow for a 7.5" 200mm tire where the EASY kit will not.

Our 180mm "EASY" wide front tire kits for 1986-2013 HD touring models ($599.95) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

We are phasing out the 1" axles and axle spacers for the 2000-2007 applications. If you have a 2000-2007 please call to check availability of the 1" parts. We can easily swap you over to a 25mm axle and axle spacers as long as you request a hub in the new wheel with 25mm bearings which would be a standard hub for a 2008-2021 HD touring model.

MADE IN THE USA!
Learn More

***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***

If you have STOCK STYLE fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the STOCK STYLE fender mounts perfectly. We offer these spacers in FOUR different widths and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as 1984-2013 HD touring models. We also make fender spacers for aftermarket billet style fork legs which can be found in another listing.

Please see the menus below for choices.

***SHIPPING IS ONLY $6. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.

MADE WITH PRIDE IN MICHIGAN!!!



Learn More

***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***

If you have American Suspension or Arlen Ness billet fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the Arlen Ness Hot Legs and the EARLY STYLE American Suspension bagger legs fender mounts perfectly. (These do not fit the late style American Suspension fork legs that use studs w nuts to attach the fender mount to the fork leg) You will have a even gap around the rectangular portion of the fender mount. We offer these spacers in FOUR different widths, and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as all 1984-2013 HD touring models. We also make fender spacers for stock style legs which can be found in another listing.

***SHIPPING IS ONLY $7. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.

Please see the menus below for choices.

MADE WITH PRIDE IN MICHIGAN!!!


Learn More

These fenders fit 1984-present HD Touring models

Show off that 21" or 23" front wheel with these AMERICAN MADE STEEL wraparound style fenders for HD touring models. These fenders are stamped in one piece, not welded down the center, and fit the 120/70/21, 130/60-21 or 130/60-23 tires perfectly. These fenders are laser cut including the mounting holes so you don't have to mess around with measuring and drilling! This fender has a rounded tip style and will take the guesswork out of installing your new front fender.

These fenders also INCLUDE BILLET ALUMINUM FENDER MOUNTING SPACERS so everything you need is included! The billet syle fork legs from Arlen Ness require a different style fender spacer than the stock style fork leg, but we have you covered. We manufacture these special fender spacers to make your fender installation a breeze. Choose your spacer style from the menu below. Raw machined spacers come standard, but gloss black or chrome are available too.

All fenders are inspected prior to shipping. Please choose from 21" or 23" applications in the menus below and also select the year of your HD touring model.

MADE WITH PRIDE IN THE USA!!!

Learn More

You are looking at our 180mm EZ RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models. This kit DOES NOT REQUIRE A FORK LEG CHANGE!! We put a small step bend in the fender tab to step inboard so our fender will fit the stock dimension fender mount. Pricing for this kit starts at $699.95 for a raw metal finish on the CNC cut aluminum slider covers. Black or chrome slider covers are available for extra cost. Please see menus below for pricing details.

Standard kit includes:

-American made 14g STAMPED STEEL laser cut fender. This is the finest quality fender available anywhere and it carries our lifetime structural warranty.
-CNC cut aluminum slider covers all in a raw metal, gloss black powdercoat or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire with NO brake modifications.

See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Our slider covers also have a special cut on the inboard side for fender clearance. Our fender body line mates up with the custom cut slider covers so everything works together perfectly.

***We can also supply a wheel with brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT FITS 18" DIAMETER RIMS ONLY.
We also offer ONE PIECE STAMPED STEEL FENDER KITS for the 21" and 23" fat tires. Please give us a call if interested in those sizes.

Made in the U.S.A.

Learn More

You are looking at THE ORIGINAL 180mm RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models including our MACHINED STOCK STYLE FORK LEGS. Pricing for this kit starts at $899.95 for a raw metal finish. Black or chrome fork legs and slider covers are available but cost extra. Please see menus below for pricing details.

Standard kit includes:

-American made STAMPED STEEL laser cut fender.
-Extensively machined fork legs, & custom CNC cut ALUMINUM slider covers all in a raw metal, gloss black or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-Any front suspension internals can be used with this kit.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire w NO brake modifications.
-Available for single or dual disc, abs or non abs brakes.

Chrome or black fork legs and slider covers available at additional cost. See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Exchange of stock fork legs & slider covers required (refundable core charge applies). This is necessary because we extensively machine the fork legs for both tire clearance and also to accept our wider than stock fender. The slider covers also get a special cut on the inboard side for fender clearance. Our fenders are laser cut in such a way to mate up with the machined fork legs and cut slider covers so everything works together perfectly.

***We can also supply a wheel w brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT IS FOR 18" DIAMETER RIMS ONLY.

We now offer STAMPED ONE PIECE STEEL FENDER kits for the fat 21 and fat 23" tires. Please call us if you would like to discuss those larger size fat front tire kits.

Made in the U.S.A.

Learn More

Native has been installing 18" 180mm (7.25" wide) front tires on the HD touring models for 13 years now. Therefore we have the most experience and offer the most complete well thought out kit available.

This is our least expensive wide front tire kit. The 180mm Pitbull "EASY" front tire kit for the 1986-2013 Harley Baggers.

Our Native EASY wide tire kit:
- DOES NOT require a triple tree change.
- Allows for installation of the WIDEST 18" 180mm tire available. (7.25")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that fits perfect every time and is the BEST quality available. Our STEEL fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such excellent quality with a beautiful finish ready to scuff and prime.
- Allows you to choose from hundreds of wheels styles that we can supply to you.
- Uses a very common size 180/55-18 tire that is readily available around the country.

Our standard EASY kit includes:
Our original Native brand American made one piece stamped steel laser cut OG wrap or HALFBREED wrap style fender & custom cut slider covers in a RAW metal finish.

Benefits of the EASY kit are:
• No triple tree change required.
• No fork leg or brake modifications required. Ok w single or dual disc, abs or non abs.
• Allows for installation of a 180mm (7.25") wide tire.
• Chrome or gloss black slider covers are available at additional cost.

You can choose from 5 different fender styles and 3 different finish options in the menus below. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this EASY kit vs our more expensive PRO kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. Our PRO kit includes trees that move the fork legs farther apart so you can run a full sided fender without a notch.

Our 180mm "PRO" wide front tire kits for 1994-2013 HD touring models ($1595) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

MADE IN USA!

Learn More

HHI now offers a BOLT-ON triple tree kit for a 23" wheel installation on FL touring model bikes. The design geometry of this triple tree results in a trail measurement similar to stock factory HD speciifications. If you want a quick and easy, cost effective method of safely installing a 23" wheel, this is the solution.

This kit offers the following features and benefits;

Fits all 1987 and up FL Touring Model bikes with standard late model ignition location, both fairing and non-fairing.
6 degree triple tree rake results in stock trail geometry
Responsive and stable handling
Performs as good or better than stock
Direct bolt-on, NO modifications necessary
Positions front wheel forward approximately 2"
Headlight angle can be adjusted without the use of a raked bezel kit
Does not require fork extensions and uses stock length fork covers
Kit includes fork travel limiters to prevent fender interference
Stock fork lock fully functional
Works with stock and custom size rear wheels
Available in machine or black finish

MADE IN THE USA!!!

Learn More

After over 40 years of bolting PM calipers to stock front fork legs PM has developed a superior set of lower legs to compliment their wheels and braking systems. Artfully sculpted from heat treated billet aluminum, machined PM icon logo with a pin-stripe detail that extends the length of the forks, and a hidden axle design all add up to the perfect set of legs. Combine with our Native billet aluminum slider covers for a great front end. Kit contains axle, axle covers, left and right legs with caliper and fender mounts installed. (THESE LEGS USE STOCK STYLE FENDER SPACERS) Caliper mounts will accommodate stock HD calipers, HHI or PM Calipers for single or dual disc. Applications available for 2000-present HD touring models.

We are trying to keep these legs in stock but sometimes we run out so please call to make sure the legs you want are in stock.

Learn More

***THIS ROAD GLIDE HAS BEEN SOLD. GIVE US A CALL IF YOU WOULD LIKE TO TALK TO US ABOUT BUILDING YOU A SIMILAR ONE***

The Road Glide you are looking at was built to handle long distance touring with ease yet turn heads everywhere it goes. It is also about to set the next front wheel trend!
BE THE LEADER of this trend along with Native Customs! The 180 FRONT TIRE on this bike will not only set the next trend but it will take you everywhere you want to go IN GREAT COMFORT! Yes, this 180 front tire not only looks tough as hell but it soaks up bumps of all sizes so YOU don't, and it carves up the corners like a rice rocket. YOU WILL FALL IN LOVE WITH THE WAY THIS BIKE HANDLES!
Besides having the most unique front wheel tire combo in the bagger world, this bike also has a pitbull stance that will stop people in their tracks wherever its parked. They will continue to stare when you fire this beast up and they hear the mufflers that sound like a old big block Corvette with side pipes. Other attributes of this bike are:

NATIVE FRONT and rear air ride.
NATIVE front fender.
NATIVE forks.
NATIVE slider covers,
NATIVE stretched tank.
NATIVE all steel rear fender and fillers
NATIVE / Danny Gray seat.
NATIVE flip down hidden plate under the rear fender.
8.75" tall chrome bezel lights in the filler panels function as run, turn, and brake lights.
Flared side covers.
Stretched and scalloped saddlebags w usable space in the bottoms.
Relaxer handlebars.
All chrome hand controls.
PM air cleaner, grips, extended shift lever, brake lever, and pegs.
Special 21" XL Banana boards with no rivets.
Fresh 95" fuel injected motor with 10.25:1 pistons, Andrews cams, headwork, Power Commander and its been dyno tuned.
HD electronic cruise control.
Medallion 6 gauge kit w skull design. Includes oil temp gauge instead of the useless air temp gauge.
HD Screamin Eagle 6 speed trans that was just freshened up with all new bearings.
Vance and Hines headpipes with CFR mufflers with special extended Howitzer style tips.
180mm rear tire.
HD cush drive rear pulley for exceptionally smooth power delivery.
Rear drivetrain stabilizer.
Tinted headlight cover.

4 speaker sound system w 300 watt amp in the fairing so as not to take up space in the bags. 6.5 JL in fairing. 6x9 Hertz in the bags.
Sony head unit that allows you to put your ipod or iphone RIGHT IN THE DECK! Yes, it has a tray where you put your phone IN the deck.
(you can also do a bluetooth connection from your phone to the deck so you can listen to pandora while the phone is in your pocket with no cords.)

The rear fender will accept any HD backrest but I don't have one on it now. The neck on this bike HAS NOT BEEN CUT. That is just another pro to our 180 front tire kit. It handles great without cutting your frame! The front fairing sits over 6" lower than stock with the air ride dropped yet the entire bike raises up about 3" so it's very ridable in any condition. This bike DOES NOT sit on the frame when the air ride is deflated. Here at Native Customs we intend for the baggers we build to be ridden....... a lot! We feel that a bagger that sits on the frame when parked is not safe to ride on the streets because if you should lose air then the frame would drag and the outcome wouldn't be good. The frame on this bike still sits two inches off the ground with the air totally deflated. It gives a slammed to the ground look yet is still safe to ride on the streets.

This bike is a very reliable bad-ass classy custom that was built for the purpose of riding long distances and turning heads every mile along the way. Black, as I call her, was born in 2005, has a clean Harley-Davidson title and HAS BEEN SOLD! Let me know if you have any questions about her or about us building you a similar one by email at Paul@NativeCustomBaggers.com or phone 269-276-9200.



Learn More

This cool all-in-one taillight and license plate mount features built in turn signals in the tips of the cat eye taillight. This beautiful billet taillight is a easy bolt-on application for 2000-present HD touring models and is available in chrome or black. When installed on these models, this taillight will cover all the stock mounting holes from your stock taillight and turn signal rail! You can now have a custom taillight without repainting your fender. This taillight can also be used in custom installations with the weld-in pocket or you can fabricate your own pocket.
This taillight is 5.5" tall and 7" wide and can be directly plugged into most OEM wiring harness. This taillight requires a mount in order to bolt directly to your stock fender.

Mounts and pockets are optional and available for additional cost in the menus below. Mounts are only available in chrome.



Learn More

In order to clean up the back of your bike, you have to get that ugly license plate off of your fender. But where do you put the dam thing? We have an answer for you. This NATIVE CUSTOMS original design license plate mount will take care of your dilemma! This particular plate mount is for use with DUAL exhaust. (a plate mount for use with 2 into 1 exhaust and stock length bags is also available in another listing)

This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.

***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***

These plate mounts are MADE WITH PRIDE IN THE USA!

Learn More

This 18x5.5 TALON replica wheel is machined from a thicker than normal 3D blank for more detail and is a match for the factory wheel on the 2018 and 2019 Street Glide and Road Glide Specials as well as some CVO Street Glides. It is available with a dual disc or single disc hub that will accept the factory Talon brake rotors. We can add a mounted and bead balanced tire of your choice so its ready to install on your motorcycle when you receive it. Our goal is to make things easy for you!

ABS brake systems will still function properly when switching from dual to single disc using proper procedures EXCEPT on bikes equipped with RDRS.

Please click on the options in the menus below to get your final price.

MADE IN THE USA! Learn More

Don't let the low price fool you. These U.S. made smoothy wheels are top quality and available in show chrome or gloss black powder coat. All of these smoothy wheels feature a smooth radius lip and all come with the bearings and a valve-stem installed. A smoothy front wheel is a great look to compliment our 180 front tire kit and a rear one is super easy to clean and will save you $ over a custom cut wheel. Front wheels are available with single or dual disc hubs for abs or non abs applications. All smoothy wheels are special order and will ship in 4-6 weeks. All of the wheels we offer are available with tires mounted, ready to install. Please give us a call if you would like a front and rear wheel and tire package. You'll be glad you did.

These smoothy wheels are MADE WITH PRIDE IN THE USA!!!

Click on the desired options in the menu below to see your final price.

Learn More

This is a wheel built by Performance Machine specifically for our NATIVE 180mm front tire kits. We feel that Performance Machine makes thee finest wheels in the industry, bar none! PM blanks are made from VIRGIN AMERICAN aluminum, not recycled metal or sub-par imported aluminum. PM is also the only manufacturer that PHYSICALLY TESTS their wheels to insure they are the safest wheels on the market vs a computer figuring if the design is strong enough for the real world. PM wheels are held to the highest quality standards and this Platinum cut black anodized and polished finish shows it.

Matching stock diameter or 13" rotors are available as well as a mounted and bead balanced tire so its ready to install when delivered to your door!

See menus below for options.

PLEASE CALL US TO CHECK AVAILABILITY PRIOR TO ORDERING.

Call the shop now to check availability @ 269-276-9200.

MADE IN THE USA!!! Learn More

This is a wheel built specifically for Native for our Pitbull 180 front tire kits by Roland Sands Design / Performance Machine in a Black Ops (two tone black) finish. The outer rim is texture black while the spokes are satin anodized black.

We feel that RSD / Performance Machine makes thee finest wheels in the industry, bar none! PM forges their own blanks from VIRGIN aluminum unlike their competitors which may be made from recycled materials. PM is also the only manufacturer that physically tests their wheels to insure they are the safest wheels on the market. PM also has the best finish of any wheel manufacturer on the planet from LIFETIME WARRANTED show chrome to platinum contrast cut finishes.

PM offers a LIFETIME PLATING WARRANTY to the original purchaser on all their chrome wheels. Matching stock diameter or 13" rotors are available as well as a tire mounted and bead balanced so its ready to install when delivered to your door!

*Please call our shop to make sure prior to ordering. If we don't have it in stock we can special order it for you. Call the shop now to check availability @ 269-276-9200.

MADE IN THE USA!!!

Learn More

THESE ARE OUR FAVORITE MUFFLERS ON THE PLANET!
I know that's a pretty strong statement but here's why: They sound absolutely killer. They produce the DEEPEST sounding exhaust note we have ever heard. Similar to a BIG BLOCK 60's Corvette with side pipes. They get loud when your in the throttle yet are mellow at cruising speed so they won't drown out your stereo system. These 4.5" diameter mufflers have a perforated inner wrapped in fiberglass and an additional (non removable) louvered core baffle to provide just the right amount of back-pressure. The finish on these pipes is also top notch. Tig welded muffler bodies and beautifully machined tips in a variety of styles. (see other listings for different style tips) Available in either show chrome or a black ceramic finish. Please call the shop to check availability or if you have any other questions. 269-276-9200

***These particular mufflers are all chrome and have standard length TOTALLY SMOOTH tips.

***They will be drop shipped directly from the manufacturer.

MADE IN THE USA!!!

Learn More

THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.

We have the BLACK 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.

Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.

***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.


MADE WITH PRIDE IN THE USA!!!

Learn More

THESE ARE OUR FAVORITE MUFFLERS ON THE PLANET!
I know that's a pretty strong statement but here's why: They sound absolutely killer. They produce the DEEPEST sounding exhaust note we have ever heard. Similar to a BIG BLOCK 60's Corvette with side pipes. They get loud when your in the throttle yet are mellow at cruising speed so they won't drown out your stereo system. These 4.5" diameter mufflers have a perforated inner wrapped in fiberglass and an additional (non removable) louvered core baffle to provide just the right amount of back-pressure. The finish on these pipes is also top notch. Tig welded muffler bodies and beautifully machined tips in a variety of styles. (see other listings for different style tips) Available in either show chrome or a black ceramic finish. Please call if you have any questions. 269-276-9200

***These particular mufflers are all chrome and have standard length tips with flutes on the inside and outside of the tip***

***They will be drop shipped from the manufacturer.

MADE IN THE USA!!!


Learn More

This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules. This direct plug module fits 2010-2013 HD Street Glides and Road Glides. Wiring instructions included.

*** THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT. IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN CALL OUR SHOP TO ORDER. WE CAN PROVIDE YOU WITH A SPECIAL MODULE THAT CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.

Taillight modules for older touring models as well as 2010-2013 Road Kings and Ultra models available as well. See our other listings for these. If you need a module for a CVO model please call the shop. 269-276-9200


MADE WITH PRIDE IN THE USA!!!


Learn More

This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules.

This direct plug module fits:
All 1996 - 2009 HD touring models as well as 2010-13 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.

***THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT.
IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN ORDER THE RUN, TURN, BRAKE MODULE WITHOUT THE HARNESS. THAT MODULE CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.

We also offer taillight modules for the same applications listed above but WITHOUT a rear fender harness for $50.00 less. You will have to re-use your stock rear fender harness with those modules. Taillight modules for 2010-2013 Street Glide and Road Glide models available as well. See our other listings for these. If you need a module for a CVO model please call the shop.


MADE WITH PRIDE IN THE USA!!!


Learn More

*** THESE PIPES WILL BE DROP SHIPPED TO YOU AND THAT WILL USUALLY TAKE 1-2 WEEKS. PLEASE CALL IF YOU WOULD LIKE TO CHECK AVAILABILITY BEFORE ORDERING. 269-276-9200.

THESE ARE OUR FAVORITE MUFFLERS ON THE PLANET!
I know that's a pretty strong statement but here's why: They sound absolutely killer. They produce the DEEPEST sounding exhaust note we have ever heard. Similar to a BIG BLOCK 60's Corvette with side pipes. They get loud when your in the throttle yet are mellow at cruising speed so they won't drown out your stereo system. These 4.5" diameter mufflers have a perforated inner wrapped in fiberglass and an additional (non removable) louvered core baffle to provide just the right amount of back-pressure. The finish on these pipes is also top notch. Tig welded muffler bodies and beautifully machined tips in a variety of styles. (see other listings for different style tips) Available in either show chrome or a black ceramic finish.

***These particular mufflers have special extended tips installed. For a shorter tip style see our other listings.

MADE IN THE USA!!!



Learn More

These Cyclesmith American made oversize 21" long XL drivers floorboards look cool, offer more foot placement choices, and actually increase lean angle when cornering. The extra 2" on these boards compared to the 19" bananas is all in the front of the board. Notice how the front of the board follows the same angle as the HD engine guard. These boards are constructed of billet aluminum with a vibration absorbing rubber insert. These boards will bolt on directly in place of your stock boards on 1980 - present HD touring models and 1986 - present Softail models originally equipped with floorboards. (Shorter 19" drivers Banana floorboards are also available in another listing on this site)

We prefer to use the rivet-less style Banana boards with the PM shift and brake arms, and PM rubber pegs which we offer elsewhere on this site. (The pattern on the rubber insert of the Banana boards is almost a perfect match to the PM pegs and grips) This will give you that clean and simple, less is more style that people will notice. Check out the bikes in the pics to see what we mean.


ALL OF THESE PARTS ARE MADE WITH PRIDE IN THE USA!

Learn More

Aggressive is an understatement for the these stretched Venom style saddlebags. The bottom of the bag has a sweeping curve that starts out the same as a stock saddlebag in the front of the bag down to a 3" stretch at the back of the bag. This length of bag is a perfect match to the stock STREET GLIDE FENDER! Available with dual, single, or no exhaust cut-outs and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted inside and "false" interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware with these bag bottoms.

These bags are vaccum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*


MADE IN USA!

Learn More

These cool slider covers are a Native Custom Baggers original design. These slider covers are not spot welded like the stock covers. The top and back of these covers are smooth and dimple free! The bottoms are shaped with an angle cut that's about parallel to the ground with a point in the front. This is one of those details that everyone will notice and that will set you apart from the other bikes at bike night!
They are available in raw, gloss black powdercoat or show chrome. These fit all 1984 and later HD touring models.

SEE MENUS BELOW TO CHOOSE FINISH AND YEAR OF BIKE.

CLICK ON OPTIONS TO SEE FINAL PRICE.

Crafted with pride in the U.S.A.

Learn More

This AMERICAN MADE taillight module will make single or dual function lights work as running, turn, and brake lights. It is a direct plug in installation between the main harness and YOUR EXISTING rear fender harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules. This direct plug-in module fits:
All 1996 - 2009 HD touring models. 2010-2013 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.

With this module you must re-use your stock rear fender harness or come up with your own wiring to go from this module to your taillights. If you use your existing rear fender harness you will simply connect your existing turn signal wires to your new taillights. (one power wire and one ground wire)
If you'd rather not deal with re-using your stock rear fender harness then order our tail module WITH the attached harness found in another listing. These other taillight modules come complete with license plate, left taillight and right taillight harnesses with 36" leads and quick disconnects for these same 96-09 and 2010-2013 touring models as well. See our other listing for these.


MADE WITH PRIDE IN THE USA!!!

Learn More

***These bags fit 1993-2013 HD touring models. See our other listing for bags to fit 2014 and later Baggers***

These top quality saddlebags are 3" longer than stock with a straight bottom. This length of bag is a perfect match for the stock STREET GLIDE fender! Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO!

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More

These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 1" deeper in the front and 3" deeper in the rear of the bag than a stock bag. This length of bag is a perfect match for the stock STREET GLIDE fender! The S-curve shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More

Arlen Ness Hot Legs for Bagger Models in single disc and dual disc versions.

• The tapered billet design features a hidden axle that drastically cleans up the front end of your FLT Bagger
• Offered in single left disc - single caliper, or dual disc style in Deep Cut or smooth. Chrome or Black
• Available for 2000-present applications
• Ness fork boot covers are available separately to give the ultimate in appearance
• Sold in Pairs

Learn More

These American made oversize 19" long drivers floorboards look cool, offer more foot placement choices, and actually increase lean angle when cornering. We STOCK these in a chrome or gloss black powder-coated finish WITHOUT rivets. We can also get them with rivets pretty quick. These boards are constructed of billet aluminum with a vibration absorbing rubber insert. These boards will bolt on directly in place of your stock boards on 1980 - present HD touring models and 1986 - present Softail models originally equipped with floorboards.

We prefer to use the rivet-less style Banana boards with the PM shift and brake arms, and PM rubber pegs which we offer elsewhere on this site. (The pattern on the rubber insert of the Banana boards is almost a perfect match to the PM pegs and grips) This will give you that clean and simple, less is more style that people will notice. Check out the bikes in the pics to see what we mean.

If you choose the riveted style Banana boards, then Banana style riveted shift pegs, brake pedal pad, passenger floorboards, sport banana boards that mount with a standard foot-peg style male mount are also available if you prefer this style. See the menu below to add these optional items. These add-on items are also available without the rivets if you prefer the Banana accessories with your rivet-less Banana drivers boards. If you choose rivet-less drivers boards, you will get rivet-less accessories from the menus below. Riveted drivers boards would get riveted accessories.

Note* The Passenger floorboards are made to bolt to the stock HD floorboard housings. When they are in the up position, you will still see the original HD floorboard housing.

ALL OF THESE PARTS ARE MADE WITH PRIDE IN THE USA!

Learn More

For only a few bucks you can clean up the looks of your STOCK fork legs with this trick AMERICAN MADE flush front axle. This Native STAINLESS STEEL 25mm flush axle is available with chrome or gloss black ends for the 2008-present HD touring models. A installation tool is included along with instructions as well. Please choose your axle end cap finish from the menu below.

Learn More

Performance Machine makes some of the finest parts in the motorcycle industry, and this beautiful brake arm is no exception! Sculpted from billet aluminum and then triple chrome plated, black anodized, or black anodized and contrast cut if you desire, this brake arm will add a touch of cool to an otherwise overlooked area on your bike. This contour brake arm comes with the rubber brake pedal pad shown. Fits 97-present HD touring models. See below for choices.

MADE WITH PRIDE IN THE USA!

Learn More

Performance Machine makes some of the finest parts in the motorcycle industry, and this beautiful shift arm is no exception!

These shift arms are about 1.25" longer than a stock HD shift arm. Sculpted from billet aluminum and then triple chrome plated, black anodized, or black anodized and contrast cut, this shift arm will add a touch of cool to an otherwise overlooked area on your bike. (the contrast cut version has the contrast silver areas polished to a high luster)
This shift arm comes with the contour shift peg (with rubber insert) and shaft spacer shown. Also available in a heel / toe version. Fits 84-present HD touring and 00-10 FLST models. See below for choices.

***These shift arms are NOT COMPATIBLE with 2014 and later WATER COOLED HD touring models***

***The heel shifter is also 1.25" longer that stock so these PM heel and toe shifter combos have 2.5" more room between the shift pegs***

MADE WITH PRIDE IN THE USA!

Learn More