You are looking at our 180mm EZ RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models. This kit DOES NOT REQUIRE A FORK LEG CHANGE!! We put a small step bend in the fender tab to step inboard so our fender will fit the stock dimension fender mount. Pricing for this kit starts at $699.95 for a raw metal finish on the CNC cut aluminum slider covers. Black or chrome slider covers are available for extra cost. Please see menus below for pricing details.

Standard kit includes:

-American made 14g STAMPED STEEL laser cut fender. This is the finest quality fender available anywhere and it carries our lifetime structural warranty.
-CNC cut aluminum slider covers all in a raw metal, gloss black powdercoat or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire with NO brake modifications.

See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Our slider covers also have a special cut on the inboard side for fender clearance. Our fender body line mates up with the custom cut slider covers so everything works together perfectly.

***We can also supply a wheel with brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT FITS 18" DIAMETER RIMS ONLY.
We also offer ONE PIECE STAMPED STEEL FENDER KITS for the 21" and 23" fat tires. Please give us a call if interested in those sizes.

Made in the U.S.A.

Learn More

You are looking at THE ORIGINAL 180mm RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models including our MACHINED STOCK STYLE FORK LEGS. Pricing for this kit starts at $899.95 for a raw metal finish. Black or chrome fork legs and slider covers are available but cost extra. Please see menus below for pricing details.

Standard kit includes:

-American made STAMPED STEEL laser cut fender.
-Extensively machined fork legs, & custom CNC cut ALUMINUM slider covers all in a raw metal, gloss black or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-Any front suspension internals can be used with this kit.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire w NO brake modifications.
-Available for single or dual disc, abs or non abs brakes.

Chrome or black fork legs and slider covers available at additional cost. See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Exchange of stock fork legs & slider covers required (refundable core charge applies). This is necessary because we extensively machine the fork legs for both tire clearance and also to accept our wider than stock fender. The slider covers also get a special cut on the inboard side for fender clearance. Our fenders are laser cut in such a way to mate up with the machined fork legs and cut slider covers so everything works together perfectly.

***We can also supply a wheel w brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT IS FOR 18" DIAMETER RIMS ONLY.

We now offer STAMPED ONE PIECE STEEL FENDER kits for the fat 21 and fat 23" tires. Please call us if you would like to discuss those larger size fat front tire kits.

Made in the U.S.A.

Learn More

Native has been installing 18" 180mm (7.25" wide) front tires on the HD touring models for 13 years now. Therefore we have the most experience and offer the most complete well thought out kit available.

This is our least expensive wide front tire kit. The 180mm Pitbull "EASY" front tire kit for the 1986-2013 Harley Baggers.

Our Native EASY wide tire kit:
- DOES NOT require a triple tree change.
- Allows for installation of the WIDEST 18" 180mm tire available. (7.25")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that fits perfect every time and is the BEST quality available. Our STEEL fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such excellent quality with a beautiful finish ready to scuff and prime.
- Allows you to choose from hundreds of wheels styles that we can supply to you.
- Uses a very common size 180/55-18 tire that is readily available around the country.

Our standard EASY kit includes:
Our original Native brand American made one piece stamped steel laser cut OG wrap or HALFBREED wrap style fender & custom cut slider covers in a RAW metal finish.

Benefits of the EASY kit are:
• No triple tree change required.
• No fork leg or brake modifications required. Ok w single or dual disc, abs or non abs.
• Allows for installation of a 180mm (7.25") wide tire.
• Chrome or gloss black slider covers are available at additional cost.

You can choose from 5 different fender styles and 3 different finish options in the menus below. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this EASY kit vs our more expensive PRO kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. Our PRO kit includes trees that move the fork legs farther apart so you can run a full sided fender without a notch.

Our 180mm "PRO" wide front tire kits for 1994-2013 HD touring models ($1595) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

MADE IN USA!

Learn More

HHI now offers a BOLT-ON triple tree kit for a 23" wheel installation on FL touring model bikes. The design geometry of this triple tree results in a trail measurement similar to stock factory HD speciifications. If you want a quick and easy, cost effective method of safely installing a 23" wheel, this is the solution.

This kit offers the following features and benefits;

Fits all 1987 and up FL Touring Model bikes with standard late model ignition location, both fairing and non-fairing.
6 degree triple tree rake results in stock trail geometry
Responsive and stable handling
Performs as good or better than stock
Direct bolt-on, NO modifications necessary
Positions front wheel forward approximately 2"
Headlight angle can be adjusted without the use of a raked bezel kit
Does not require fork extensions and uses stock length fork covers
Kit includes fork travel limiters to prevent fender interference
Stock fork lock fully functional
Works with stock and custom size rear wheels
Available in machine or black finish

MADE IN THE USA!!!

Learn More

Native has been installing 18" 180mm (7.25" wide) tires on the front of HD touring models for about 15 years now. Yes, 15 years! Therefore we have the most experience and offer the most complete, most tested, best engineered well thought out fat front tire kit available anywhere.

PLEASE NOTE: We include the NECESSARY custom notched slider covers with our kit and we don't charge extra for chrome or black axle spacers, fender spacers or for any of our fender styles.

This is the ORIGINAL wide front tire kit for 1994-2013 HD touring models! We call it our PRO kit because it is the most comprehensive wide front tire kit we offer. Our Pitbull PRO wide front tire kit allows you to run a 18 inch 180mm (7.25") or 200mm (7.5") wide tire up FRONT and it compliments a 180 or 200mm rear tire perfectly. This kit fits Road Glides, Road Kings and all bat-wing fairing models like Street Glides and Ultra Classics. Your fairing, nacelle or RG gauge housing will bolt up to your new Native trees just like it did to the stock trees because while our trees do spread your forks farther apart, overall they are not any wider than stock trees.


Our Native PRO wide tire kit:
- Allows for installation of the WIDEST TIRE available. (7.5")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that FITS PERFECT EVERY TIME and is the BEST quality available ANYWHERE. Our steel fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such awesome quality.
- Allows you to choose from hundreds of wheel styles that we can supply to you complete with rotors and a bead balanced tire.
- Uses a very common size tire that is readily available around the country.
- DOES NOT require special modified fork legs.


Our standard base price PRO kit includes:
- Extremely strong STOCK RAKE machined finish triple trees that increase the distance between your fork tubes. (chrome or black lower tree available as an option)
- Your choice of any one of our Native brand American made STAMPED STEEL LASER CUT fenders.
- Special raw metal finish SLIDER COVERS which are VERY IMPORTANT and MUST be used with our kit. Chrome or gloss black powder-coat available as an option.
- Special width chrome or gloss black axle spacers are included for NO EXTRA CHARGE. These will hide your wheel bearings!
- Special width chrome of gloss black fender spacers included for NO EXTRA CHARGE!
- Special width axle for stock HD, Arlen Ness or Performance Machine fork legs. (Flush axle with chrome or gloss black end caps is included for stock style fork legs).


Benefits of the PRO kit over our EASY kit are:
- A wider look because the fork legs are spread apart more than stock.
- The PRO fender is not notched like the EASY kit fender is.
- PRO kit allows the use of a 200mm (7.5" wide) tire.


You can choose from our fender styles and 3 finish options in the menus below and you can mix and match finish options. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this PRO kit vs our less expensive EASY kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. This PRO kit includes trees that move the fork legs farther apart (making the front end LOOK wider) so you can run a full sided fender without a notch. Both kits include a 8" wide STAMPED STEEL fender and can accommodate the same 7.25" wide 180mm tire and wheel. This PRO kit will allow for a 7.5" 200mm tire where the EASY kit will not.

Our 180mm "EASY" wide front tire kits for 1986-2013 HD touring models ($599.95) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

We are phasing out the 1" axles and axle spacers for the 2000-2007 applications. If you have a 2000-2007 please call to check availability of the 1" parts. We can easily swap you over to a 25mm axle and axle spacers as long as you request a hub in the new wheel with 25mm bearings which would be a standard hub for a 2008-2021 HD touring model.

MADE IN THE USA!
Learn More

WE HAVE ONE PAIR IN STOCK AT THIS SPECIAL CLEARANCE PRICE!

These billet aluminum Arlen Ness CHROME Deep Cut fork boots are 2" longer than a standard fork boot. These are for use with longer fork tubes or a 2" or longer fork cap insert that comes with some aftermarket triple trees like raked trees. These fit 2014-Present HD touring models.

Learn More

These HHI triple trees are a time tested, top quality part. Everything will bolt up to these trees just like stock. All hardware and polyurethane riser bushings included.

Only one set in stock at this price.

These trees fit 2013 and older HD touring models. These will not fit 2014-present models.


THESE TREES ARE MADE WITH PRIDE IN THE USA!!!

Learn More

Performance Machine makes some of the finest parts in the motorcycle industry, and this beautiful brake arm is no exception! Sculpted from billet aluminum and then triple chrome plated, black anodized, or black anodized and contrast cut if you desire, this brake arm will add a touch of cool to an otherwise overlooked area on your bike. This contour brake arm comes with the rubber brake pedal pad shown. Fits 97-present HD touring models. See below for choices.

MADE WITH PRIDE IN THE USA!

Learn More

Performance Machine makes some of the finest parts in the motorcycle industry, and this beautiful shift arm is no exception!

These shift arms are about 1.25" longer than a stock HD shift arm. Sculpted from billet aluminum and then triple chrome plated, black anodized, or black anodized and contrast cut, this shift arm will add a touch of cool to an otherwise overlooked area on your bike. (the contrast cut version has the contrast silver areas polished to a high luster)
This shift arm comes with the contour shift peg (with rubber insert) and shaft spacer shown. Also available in a heel / toe version. Fits 84-present HD touring and 00-10 FLST models. See below for choices.

***These shift arms are NOT COMPATIBLE with 2014 and later WATER COOLED HD touring models***

***The heel shifter is also 1.25" longer that stock so these PM heel and toe shifter combos have 2.5" more room between the shift pegs***

MADE WITH PRIDE IN THE USA!

Learn More

This 18x5.5 TALON replica wheel is machined from a thicker than normal 3D blank for more detail and is a match for the factory wheel on the 2018 and 2019 Street Glide and Road Glide Specials as well as some CVO Street Glides. It is available with a dual disc or single disc hub that will accept the factory Talon brake rotors. We can add a mounted and bead balanced tire of your choice so its ready to install on your motorcycle when you receive it. Our goal is to make things easy for you!

ABS brake systems will still function properly when switching from dual to single disc using proper procedures EXCEPT on bikes equipped with RDRS.

Please click on the options in the menus below to get your final price.

MADE IN THE USA! Learn More

This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules. This direct plug module fits 2010-2013 HD Street Glides and Road Glides. Wiring instructions included.

*** THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT. IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN CALL OUR SHOP TO ORDER. WE CAN PROVIDE YOU WITH A SPECIAL MODULE THAT CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.

Taillight modules for older touring models as well as 2010-2013 Road Kings and Ultra models available as well. See our other listings for these. If you need a module for a CVO model please call the shop. 269-276-9200


MADE WITH PRIDE IN THE USA!!!


Learn More

This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules.

This direct plug module fits:
All 1996 - 2009 HD touring models as well as 2010-13 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.

***THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT.
IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN ORDER THE RUN, TURN, BRAKE MODULE WITHOUT THE HARNESS. THAT MODULE CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.

We also offer taillight modules for the same applications listed above but WITHOUT a rear fender harness for $50.00 less. You will have to re-use your stock rear fender harness with those modules. Taillight modules for 2010-2013 Street Glide and Road Glide models available as well. See our other listings for these. If you need a module for a CVO model please call the shop.


MADE WITH PRIDE IN THE USA!!!


Learn More

***THIS ROAD GLIDE HAS BEEN SOLD. GIVE US A CALL IF YOU WOULD LIKE TO TALK TO US ABOUT BUILDING YOU A SIMILAR ONE***

The Road Glide you are looking at was built to handle long distance touring with ease yet turn heads everywhere it goes. It is also about to set the next front wheel trend!
BE THE LEADER of this trend along with Native Customs! The 180 FRONT TIRE on this bike will not only set the next trend but it will take you everywhere you want to go IN GREAT COMFORT! Yes, this 180 front tire not only looks tough as hell but it soaks up bumps of all sizes so YOU don't, and it carves up the corners like a rice rocket. YOU WILL FALL IN LOVE WITH THE WAY THIS BIKE HANDLES!
Besides having the most unique front wheel tire combo in the bagger world, this bike also has a pitbull stance that will stop people in their tracks wherever its parked. They will continue to stare when you fire this beast up and they hear the mufflers that sound like a old big block Corvette with side pipes. Other attributes of this bike are:

NATIVE FRONT and rear air ride.
NATIVE front fender.
NATIVE forks.
NATIVE slider covers,
NATIVE stretched tank.
NATIVE all steel rear fender and fillers
NATIVE / Danny Gray seat.
NATIVE flip down hidden plate under the rear fender.
8.75" tall chrome bezel lights in the filler panels function as run, turn, and brake lights.
Flared side covers.
Stretched and scalloped saddlebags w usable space in the bottoms.
Relaxer handlebars.
All chrome hand controls.
PM air cleaner, grips, extended shift lever, brake lever, and pegs.
Special 21" XL Banana boards with no rivets.
Fresh 95" fuel injected motor with 10.25:1 pistons, Andrews cams, headwork, Power Commander and its been dyno tuned.
HD electronic cruise control.
Medallion 6 gauge kit w skull design. Includes oil temp gauge instead of the useless air temp gauge.
HD Screamin Eagle 6 speed trans that was just freshened up with all new bearings.
Vance and Hines headpipes with CFR mufflers with special extended Howitzer style tips.
180mm rear tire.
HD cush drive rear pulley for exceptionally smooth power delivery.
Rear drivetrain stabilizer.
Tinted headlight cover.

4 speaker sound system w 300 watt amp in the fairing so as not to take up space in the bags. 6.5 JL in fairing. 6x9 Hertz in the bags.
Sony head unit that allows you to put your ipod or iphone RIGHT IN THE DECK! Yes, it has a tray where you put your phone IN the deck.
(you can also do a bluetooth connection from your phone to the deck so you can listen to pandora while the phone is in your pocket with no cords.)

The rear fender will accept any HD backrest but I don't have one on it now. The neck on this bike HAS NOT BEEN CUT. That is just another pro to our 180 front tire kit. It handles great without cutting your frame! The front fairing sits over 6" lower than stock with the air ride dropped yet the entire bike raises up about 3" so it's very ridable in any condition. This bike DOES NOT sit on the frame when the air ride is deflated. Here at Native Customs we intend for the baggers we build to be ridden....... a lot! We feel that a bagger that sits on the frame when parked is not safe to ride on the streets because if you should lose air then the frame would drag and the outcome wouldn't be good. The frame on this bike still sits two inches off the ground with the air totally deflated. It gives a slammed to the ground look yet is still safe to ride on the streets.

This bike is a very reliable bad-ass classy custom that was built for the purpose of riding long distances and turning heads every mile along the way. Black, as I call her, was born in 2005, has a clean Harley-Davidson title and HAS BEEN SOLD! Let me know if you have any questions about her or about us building you a similar one by email at Paul@NativeCustomBaggers.com or phone 269-276-9200.



Learn More

Aggressive is an understatement for the these stretched Venom style saddlebags. The bottom of the bag has a sweeping curve that starts out the same as a stock saddlebag in the front of the bag down to a 3" stretch at the back of the bag. This length of bag is a perfect match to the stock STREET GLIDE FENDER! Available with dual, single, or no exhaust cut-outs and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted inside and "false" interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware with these bag bottoms.

These bags are vaccum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*


MADE IN USA!

Learn More

***These bags fit 1993-2013 HD touring models. See our other listing for bags to fit 2014 and later Baggers***

These top quality saddlebags are 3" longer than stock with a straight bottom. This length of bag is a perfect match for the stock STREET GLIDE fender! Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO!

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More