Our glue on tank covers fit your tank like a second skin and will give your bike the sleek style your after and make your tank appear to flow into your side covers and the seam between the left and right tank covers will be TOTALLY covered up by the dash. Our covers are unique because they blend into the side covers for several inches and are also NARROW at the tail so the covers won't interfere with your legs.

The seat pocket is already cut into the covers and in most cases your current seat can be trimmed to fit perfectly. We have trimmed up stock seats and even re-used the original cover in the past. Its a little bit of work but the end result will be worth it. This NATIVE tank cover kit is made from VERY HIGH QUALITY fiberglass that has been baked to ensure its fully cured. Our covers are very easy to paint unlike the other guy's rubbery plastic covers. These covers fit 97-07 touring models w center fill gas caps. They are not designed for Road Kings but may fit if you cut the holes for the caps. This kit also includes our new low profile dash and American made chrome pop up gas cap with large diameter paint saver ring.

MADE IN USA!!!
Learn More

Is there too much dash riding on your tank? The Kustom Metal Dash smooths out your tank for a clean, low-profile look and accepts most aftermarket low-profile vented caps. Stamped steel and e-coated, the dash is ready to paint, or choose the brilliantly chromed version - both come with dash trim. The Kustom Metal Dash is available in three lengths for FLHT, FLTR, FLHX, AND HD FL TRIKE.

Short for stock FLT applications with long seat nose measures 15".
Long for stock FLHR applications with short seat nose measures 18 5/8".
Extended length for custom stretched tanks measures 19 5/8", but can be trimmed to fit.

Easy to install. Gas cap not included but available in the menus below. Dashes for 08-12 models only available in a e-coated paintable version.

Made in the U.S.A!!!

Learn More

You are looking at our 180mm EZ RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models. This kit DOES NOT REQUIRE A FORK LEG CHANGE!! We put a small step bend in the fender tab to step inboard so our fender will fit the stock dimension fender mount. Pricing for this kit starts at $699.95 for a raw metal finish on the CNC cut aluminum slider covers. Black or chrome slider covers are available for extra cost. Please see menus below for pricing details.

Standard kit includes:

-American made 14g STAMPED STEEL laser cut fender. This is the finest quality fender available anywhere and it carries our lifetime structural warranty.
-CNC cut aluminum slider covers all in a raw metal, gloss black powdercoat or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire with NO brake modifications.

See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Our slider covers also have a special cut on the inboard side for fender clearance. Our fender body line mates up with the custom cut slider covers so everything works together perfectly.

***We can also supply a wheel with brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT FITS 18" DIAMETER RIMS ONLY.
We also offer ONE PIECE STAMPED STEEL FENDER KITS for the 21" and 23" fat tires. Please give us a call if interested in those sizes.

Made in the U.S.A.

Learn More

You are looking at THE ORIGINAL 180mm RUSH Pitbull front tire kit for 2014-present HD (Rushmore project) touring models including our MACHINED STOCK STYLE FORK LEGS. Pricing for this kit starts at $899.95 for a raw metal finish. Black or chrome fork legs and slider covers are available but cost extra. Please see menus below for pricing details.

Standard kit includes:

-American made STAMPED STEEL laser cut fender.
-Extensively machined fork legs, & custom CNC cut ALUMINUM slider covers all in a raw metal, gloss black or show chrome finish.
-Completely bolt on so any good mechanic can install this kit in only a few hours.
-Any front suspension internals can be used with this kit.
-No triple tree change required.
-Fender is notched so there is no fender between tire & fork leg.
-Allows installation of a 180mm tire w NO brake modifications.
-Available for single or dual disc, abs or non abs brakes.

Chrome or black fork legs and slider covers available at additional cost. See menus below for options.

***All of our fenders are ONE PIECE 14 gauge steel STAMPED AND LASER CUT including the mounting holes! These super high quality fenders fit perfect and are ready to scuff and prime. Your painter will be so happy with the quality that he'll probably hug you, lol. All of our fenders have adequate clearance for the stock HD banjo bolts / brake bleeders so a banjo bolt swap is NOT necessary.

***Exchange of stock fork legs & slider covers required (refundable core charge applies). This is necessary because we extensively machine the fork legs for both tire clearance and also to accept our wider than stock fender. The slider covers also get a special cut on the inboard side for fender clearance. Our fenders are laser cut in such a way to mate up with the machined fork legs and cut slider covers so everything works together perfectly.

***We can also supply a wheel w brake rotors and a tire all mounted and bead balanced so its ready so install. Give us a call to discuss wheel choices.

***This kit not for use on HD trike models because trike fork legs are longer than 2 wheeled touring fork legs. Please call our shop at 269-276-9200 if you would like to discuss a 180 front tire kit for your trike.

NOTE - THIS PARTICULAR KIT IS FOR 18" DIAMETER RIMS ONLY.

We now offer STAMPED ONE PIECE STEEL FENDER kits for the fat 21 and fat 23" tires. Please call us if you would like to discuss those larger size fat front tire kits.

Made in the U.S.A.

Learn More

Native has been installing 18" 180mm (7.25" wide) front tires on the HD touring models for 13 years now. Therefore we have the most experience and offer the most complete well thought out kit available.

This is our least expensive wide front tire kit. The 180mm Pitbull "EASY" front tire kit for the 1986-2013 Harley Baggers.

Our Native EASY wide tire kit:
- DOES NOT require a triple tree change.
- Allows for installation of the WIDEST 18" 180mm tire available. (7.25")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that fits perfect every time and is the BEST quality available. Our STEEL fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such excellent quality with a beautiful finish ready to scuff and prime.
- Allows you to choose from hundreds of wheels styles that we can supply to you.
- Uses a very common size 180/55-18 tire that is readily available around the country.

Our standard EASY kit includes:
Our original Native brand American made one piece stamped steel laser cut OG wrap or HALFBREED wrap style fender & custom cut slider covers in a RAW metal finish.

Benefits of the EASY kit are:
• No triple tree change required.
• No fork leg or brake modifications required. Ok w single or dual disc, abs or non abs.
• Allows for installation of a 180mm (7.25") wide tire.
• Chrome or gloss black slider covers are available at additional cost.

You can choose from 5 different fender styles and 3 different finish options in the menus below. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this EASY kit vs our more expensive PRO kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. Our PRO kit includes trees that move the fork legs farther apart so you can run a full sided fender without a notch.

Our 180mm "PRO" wide front tire kits for 1994-2013 HD touring models ($1595) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

MADE IN USA!

Learn More

These bags are like none other on the market!

These top quality saddlebags fit 1993-2013 HD touring models and are a full 4.5" longer than stock with a "BEVELED" bottom for more ground clearance while turning and increased cornering ability .

Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship. It's well worth the wait.


MADE WITH PRIDE IN THE USA!

Learn More

This cool all-in-one taillight and license plate mount features built in turn signals in the tips of the cat eye taillight. This beautiful billet taillight is a easy bolt-on application for 2000-present HD touring models and is available in chrome or black. When installed on these models, this taillight will cover all the stock mounting holes from your stock taillight and turn signal rail! You can now have a custom taillight without repainting your fender. This taillight can also be used in custom installations with the weld-in pocket or you can fabricate your own pocket.
This taillight is 5.5" tall and 7" wide and can be directly plugged into most OEM wiring harness. This taillight requires a mount in order to bolt directly to your stock fender.

Mounts and pockets are optional and available for additional cost in the menus below. Mounts are only available in chrome.



Learn More

These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 1" deeper in the front and 3" deeper in the rear of the bag than a stock bag. This length of bag is a perfect match for the stock STREET GLIDE fender! The S-curve shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More