Our glue on tank covers fit your tank like a second skin and will give your bike the sleek style your after and make your tank appear to flow into your side covers and the seam between the left and right tank covers will be TOTALLY covered up by the dash. Our covers are unique because they blend into the side covers for several inches and are also NARROW at the tail so the covers won't interfere with your legs.

The seat pocket is already cut into the covers and in most cases your current seat can be trimmed to fit perfectly. We have trimmed up stock seats and even re-used the original cover in the past. Its a little bit of work but the end result will be worth it. This NATIVE tank cover kit is made from VERY HIGH QUALITY fiberglass that has been baked to ensure its fully cured. Our covers are very easy to paint unlike the other guy's rubbery plastic covers. These covers fit 97-07 touring models w center fill gas caps. They are not designed for Road Kings but may fit if you cut the holes for the caps. This kit also includes our new low profile dash and American made chrome pop up gas cap with large diameter paint saver ring.

MADE IN USA!!!
Learn More

***These bags fit 1993-2013 HD touring models. See our other listings for bags to fit 2014 and later Baggers***

Aggressive is an understatement for the these stretched Venom style saddlebags. The bottom of the bag has a sweeping curve that starts out with a 1" stretch in the front of the bag down to a full 4.5" stretch at the back of the bag. Available with dual, single, or no exhaust cut-outs and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted inside and "false" interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply that as well.

These bags are vaccum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! Every bag is oven baked to insure a full cure are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 7-14 days for these bags to be custom built to your specs before we ship*


MADE IN USA!

Learn More

***These bags fit 1993-2013 HD touring models. See our other listing for bags to fit 2014 and later Baggers***

These top quality saddlebags are 3" longer than stock with a straight bottom. This length of bag is a perfect match for the stock STREET GLIDE fender! Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO!

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More

These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 2" deeper in the front and 4.5" deeper in the rear of the bag than a stock bag. The shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More

These top quality saddlebags are a full 4.5" longer than stock with a straight bottom and a very cool scalloped body line on the side. Available with dual, single, or no exhaust cutouts.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware with these bags.

These bags are vacuum injected fiberglass that is stronger and straighter than all other aftermarket "abs" bags that we have seen. Vacuum injected means that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. The high quality resin used in these bags is stable to temps that your bagger will never see which means that these bags will not change shape when exposed to high heat like when your bike sits out in the sun. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship* It's well worth the wait.


MADE WITH PRIDE IN THE USA!

Learn More

***These bags fit 1993-2013 HD touring models. See our other listings for bags to fit 2014 and later Baggers***

These top quality saddlebags are a full 4.5" longer than stock with a straight bottom. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship* It's well worth the wait.


MADE WITH PRIDE IN THE USA!

Learn More

Aggressive is an understatement for the these stretched Venom style saddlebags. The bottom of the bag has a sweeping curve that starts out the same as a stock saddlebag in the front of the bag down to a 3" stretch at the back of the bag. This length of bag is a perfect match to the stock STREET GLIDE FENDER! Available with dual, single, or no exhaust cut-outs and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted inside and "false" interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware with these bag bottoms.

These bags are vaccum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work! SKID PLATES AVAILABLE TOO.

Please choose your options from the menus below.

*Please allow 7-14 days for us to customize these bags to your specs before we ship*


MADE IN USA!

Learn More

These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 1" deeper in the front and 3" deeper in the rear of the bag than a stock bag. This length of bag is a perfect match for the stock STREET GLIDE fender! The S-curve shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.

Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.

These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!

Please choose your options from the menus below.

*Please allow 3-5 days for us to customize these bags to your specs before we ship*

MADE WITH PRIDE IN THE USA!

Learn More

Native has been installing 18" 180mm (7.25" wide) tires on the front of HD touring models for about 15 years now. Yes, 15 years! Therefore we have the most experience and offer the most complete, most tested, best engineered well thought out fat front tire kit available anywhere.

PLEASE NOTE: We include the NECESSARY custom notched slider covers with our kit and we don't charge extra for chrome or black axle spacers, fender spacers or for any of our fender styles.

This is the ORIGINAL wide front tire kit for 1994-2013 HD touring models! We call it our PRO kit because it is the most comprehensive wide front tire kit we offer. Our Pitbull PRO wide front tire kit allows you to run a 18 inch 180mm (7.25") or 200mm (7.5") wide tire up FRONT and it compliments a 180 or 200mm rear tire perfectly. This kit fits Road Glides, Road Kings and all bat-wing fairing models like Street Glides and Ultra Classics. Your fairing, nacelle or RG gauge housing will bolt up to your new Native trees just like it did to the stock trees because while our trees do spread your forks farther apart, overall they are not any wider than stock trees.


Our Native PRO wide tire kit:
- Allows for installation of the WIDEST TIRE available. (7.5")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that FITS PERFECT EVERY TIME and is the BEST quality available ANYWHERE. Our steel fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such awesome quality.
- Allows you to choose from hundreds of wheel styles that we can supply to you complete with rotors and a bead balanced tire.
- Uses a very common size tire that is readily available around the country.
- DOES NOT require special modified fork legs.


Our standard base price PRO kit includes:
- Extremely strong STOCK RAKE machined finish triple trees that increase the distance between your fork tubes. (chrome or black lower tree available as an option)
- Your choice of any one of our Native brand American made STAMPED STEEL LASER CUT fenders.
- Special raw metal finish SLIDER COVERS which are VERY IMPORTANT and MUST be used with our kit. Chrome or gloss black powder-coat available as an option.
- Special width chrome or gloss black axle spacers are included for NO EXTRA CHARGE. These will hide your wheel bearings!
- Special width chrome of gloss black fender spacers included for NO EXTRA CHARGE!
- Special width axle for stock HD, Arlen Ness or Performance Machine fork legs. (Flush axle with chrome or gloss black end caps is included for stock style fork legs).


Benefits of the PRO kit over our EASY kit are:
- A wider look because the fork legs are spread apart more than stock.
- The PRO fender is not notched like the EASY kit fender is.
- PRO kit allows the use of a 200mm (7.5" wide) tire.


You can choose from our fender styles and 3 finish options in the menus below and you can mix and match finish options. If you click on the circle next to the options you want the website will total the price for you.

***THE MAJOR DIFFERENCE of this PRO kit vs our less expensive EASY kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. This PRO kit includes trees that move the fork legs farther apart (making the front end LOOK wider) so you can run a full sided fender without a notch. Both kits include a 8" wide STAMPED STEEL fender and can accommodate the same 7.25" wide 180mm tire and wheel. This PRO kit will allow for a 7.5" 200mm tire where the EASY kit will not.

Our 180mm "EASY" wide front tire kits for 1986-2013 HD touring models ($599.95) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.

We are phasing out the 1" axles and axle spacers for the 2000-2007 applications. If you have a 2000-2007 please call to check availability of the 1" parts. We can easily swap you over to a 25mm axle and axle spacers as long as you request a hub in the new wheel with 25mm bearings which would be a standard hub for a 2008-2021 HD touring model.

MADE IN THE USA!
Learn More

In order to clean up the back of your bike, you have to get that ugly license plate off of your fender. But where do you put the dam thing? We have an answer for you. This NATIVE CUSTOMS original design license plate mount will take care of your dilemma! This particular plate mount is for use with DUAL exhaust. (a plate mount for use with 2 into 1 exhaust and stock length bags is also available in another listing)

This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.

***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***

These plate mounts are MADE WITH PRIDE IN THE USA!

Learn More