-
Category: Body parts -
Price: $0.00 - $1,000.00
Search results for 'side covers'
| 5 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
NATIVE Stretched Gas Tank Kit for 97-07 Baggers
$599.95
Our glue on tank covers fit your tank like a second skin and will give your bike the sleek style your after and make your tank appear to flow into your side covers and the seam between the left and right tank covers will be TOTALLY covered up by the dash. Our covers are unique because they blend into the side covers for several inches and are also NARROW at the tail so the covers won't interfere with your legs.
The seat pocket is already cut into the covers and in most cases your current seat can be trimmed to fit perfectly. We have trimmed up stock seats and even re-used the original cover in the past. Its a little bit of work but the end result will be worth it. This NATIVE tank cover kit is made from VERY HIGH QUALITY fiberglass that has been baked to ensure its fully cured. Our covers are very easy to paint unlike the other guy's rubbery plastic covers. These covers fit 97-07 touring models w center fill gas caps. They are not designed for Road Kings but may fit if you cut the holes for the caps. This kit also includes our new low profile dash and American made chrome pop up gas cap with large diameter paint saver ring.
MADE IN USA!!!
Learn More
The seat pocket is already cut into the covers and in most cases your current seat can be trimmed to fit perfectly. We have trimmed up stock seats and even re-used the original cover in the past. Its a little bit of work but the end result will be worth it. This NATIVE tank cover kit is made from VERY HIGH QUALITY fiberglass that has been baked to ensure its fully cured. Our covers are very easy to paint unlike the other guy's rubbery plastic covers. These covers fit 97-07 touring models w center fill gas caps. They are not designed for Road Kings but may fit if you cut the holes for the caps. This kit also includes our new low profile dash and American made chrome pop up gas cap with large diameter paint saver ring.
MADE IN USA!!!
Learn More
BEVELED Saddlebags - Full 4.5 inch stretch
Regular Price: $999.00
Special Price: $899.00
These bags are like none other on the market!
These top quality saddlebags fit 1993-2013 HD touring models and are a full 4.5" longer than stock with a "BEVELED" bottom for more ground clearance while turning and increased cornering ability .
Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship. It's well worth the wait.
MADE WITH PRIDE IN THE USA!
Learn More
These top quality saddlebags fit 1993-2013 HD touring models and are a full 4.5" longer than stock with a "BEVELED" bottom for more ground clearance while turning and increased cornering ability .
Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship. It's well worth the wait.
MADE WITH PRIDE IN THE USA!
Learn More
S curve stretched saddlebags, 2 inch front to 4.5 inch rear stretch
$999.00
These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 2" deeper in the front and 4.5" deeper in the rear of the bag than a stock bag. The shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
S curve stretched saddlebags,1 inch front to 3 inch rear stretch
$999.00
These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 1" deeper in the front and 3" deeper in the rear of the bag than a stock bag. This length of bag is a perfect match for the stock STREET GLIDE fender! The S-curve shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
NATIVE License Plate Mount for Dual Exhaust
$69.95
In order to clean up the back of your bike, you have to get that ugly license plate off of your fender. But where do you put the dam thing? We have an answer for you. This NATIVE CUSTOMS original design license plate mount will take care of your dilemma! This particular plate mount is for use with DUAL exhaust. (a plate mount for use with 2 into 1 exhaust and stock length bags is also available in another listing)
This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.
***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***
These plate mounts are MADE WITH PRIDE IN THE USA!
Learn More
This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.
***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***
These plate mounts are MADE WITH PRIDE IN THE USA!
Learn More
| 5 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
