-
Price: $0.00 - $1,000.00 -
Is product available for purchase with Google Checkout: Yes
-
Weight: $0.00 - $100.00
Search results for 'front fender'
| 15 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
Native Run, Turn, Brake Module WITHOUT Harness for ALL 96-09 HD Touring + 2010-2013 Road King and Ultra
$99.95
This AMERICAN MADE taillight module will make single or dual function lights work as running, turn, and brake lights. It is a direct plug in installation between the main harness and YOUR EXISTING rear fender harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules. This direct plug-in module fits:
All 1996 - 2009 HD touring models. 2010-2013 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.
With this module you must re-use your stock rear fender harness or come up with your own wiring to go from this module to your taillights. If you use your existing rear fender harness you will simply connect your existing turn signal wires to your new taillights. (one power wire and one ground wire)
If you'd rather not deal with re-using your stock rear fender harness then order our tail module WITH the attached harness found in another listing. These other taillight modules come complete with license plate, left taillight and right taillight harnesses with 36" leads and quick disconnects for these same 96-09 and 2010-2013 touring models as well. See our other listing for these.
MADE WITH PRIDE IN THE USA!!!
Learn More
All 1996 - 2009 HD touring models. 2010-2013 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.
With this module you must re-use your stock rear fender harness or come up with your own wiring to go from this module to your taillights. If you use your existing rear fender harness you will simply connect your existing turn signal wires to your new taillights. (one power wire and one ground wire)
If you'd rather not deal with re-using your stock rear fender harness then order our tail module WITH the attached harness found in another listing. These other taillight modules come complete with license plate, left taillight and right taillight harnesses with 36" leads and quick disconnects for these same 96-09 and 2010-2013 touring models as well. See our other listing for these.
MADE WITH PRIDE IN THE USA!!!
Learn More
S curve stretched saddlebags, 2 inch front to 4.5 inch rear stretch
$999.00
These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 2" deeper in the front and 4.5" deeper in the rear of the bag than a stock bag. The shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
21 inch XL Cyclesmith Banana Boards - Chrome or Black
$474.95
These Cyclesmith American made oversize 21" long XL drivers floorboards look cool, offer more foot placement choices, and actually increase lean angle when cornering. The extra 2" on these boards compared to the 19" bananas is all in the front of the board. Notice how the front of the board follows the same angle as the HD engine guard. These boards are constructed of billet aluminum with a vibration absorbing rubber insert. These boards will bolt on directly in place of your stock boards on 1980 - present HD touring models and 1986 - present Softail models originally equipped with floorboards. (Shorter 19" drivers Banana floorboards are also available in another listing on this site)
We prefer to use the rivet-less style Banana boards with the PM shift and brake arms, and PM rubber pegs which we offer elsewhere on this site. (The pattern on the rubber insert of the Banana boards is almost a perfect match to the PM pegs and grips) This will give you that clean and simple, less is more style that people will notice. Check out the bikes in the pics to see what we mean.
ALL OF THESE PARTS ARE MADE WITH PRIDE IN THE USA!
Learn More
We prefer to use the rivet-less style Banana boards with the PM shift and brake arms, and PM rubber pegs which we offer elsewhere on this site. (The pattern on the rubber insert of the Banana boards is almost a perfect match to the PM pegs and grips) This will give you that clean and simple, less is more style that people will notice. Check out the bikes in the pics to see what we mean.
ALL OF THESE PARTS ARE MADE WITH PRIDE IN THE USA!
Learn More
HHI 6 Piston Front Brake Calipers for 13 inch rotor applications - BLACK
$479.00
THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
We have the BLACK 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
We have the BLACK 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
NATIVE License Plate Mount for Dual Exhaust
$69.95
In order to clean up the back of your bike, you have to get that ugly license plate off of your fender. But where do you put the dam thing? We have an answer for you. This NATIVE CUSTOMS original design license plate mount will take care of your dilemma! This particular plate mount is for use with DUAL exhaust. (a plate mount for use with 2 into 1 exhaust and stock length bags is also available in another listing)
This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.
***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***
These plate mounts are MADE WITH PRIDE IN THE USA!
Learn More
This plate mount was designed for use with stock length saddlebags, but will work with the bolt-on saddlebag extensions and with some stretched saddlebags with a tall exhaust cutout (call if you plan to run with stretched bags). It bolts to the left side exhaust hanger bracket on the saddlebag rail and is adjustable forward and back so you can choose how close you want it to your saddlebag. Your plate will be at the same angle as the back of your saddlebag. It's details like these that make all the difference. Comes in a gloss black powder-coat finish. We also offer chrome or satin black led lighted license plate frames that fit both of these mounts perfectly. View your choices below.
***Note - On 2014 models you may have to trim the license plate screws to a shorter length.***
These plate mounts are MADE WITH PRIDE IN THE USA!
Learn More
NATIVE Angled and Pointed Slider Covers
$99.95
These cool slider covers are a Native Custom Baggers original design. These slider covers are not spot welded like the stock covers. The top and back of these covers are smooth and dimple free! The bottoms are shaped with an angle cut that's about parallel to the ground with a point in the front. This is one of those details that everyone will notice and that will set you apart from the other bikes at bike night!
They are available in raw, gloss black powdercoat or show chrome. These fit all 1984 and later HD touring models.
SEE MENUS BELOW TO CHOOSE FINISH AND YEAR OF BIKE.
CLICK ON OPTIONS TO SEE FINAL PRICE.
Crafted with pride in the U.S.A.
Learn More
They are available in raw, gloss black powdercoat or show chrome. These fit all 1984 and later HD touring models.
SEE MENUS BELOW TO CHOOSE FINISH AND YEAR OF BIKE.
CLICK ON OPTIONS TO SEE FINAL PRICE.
Crafted with pride in the U.S.A.
Learn More
Native Run, Turn, Brake Module WITH Harness for ALL 96-09 HD Touring + 2010-2013 Road King and Ultra
$149.95
This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules.
This direct plug module fits:
All 1996 - 2009 HD touring models as well as 2010-13 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.
***THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT.
IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN ORDER THE RUN, TURN, BRAKE MODULE WITHOUT THE HARNESS. THAT MODULE CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.
We also offer taillight modules for the same applications listed above but WITHOUT a rear fender harness for $50.00 less. You will have to re-use your stock rear fender harness with those modules. Taillight modules for 2010-2013 Street Glide and Road Glide models available as well. See our other listings for these. If you need a module for a CVO model please call the shop.
MADE WITH PRIDE IN THE USA!!!
Learn More
This direct plug module fits:
All 1996 - 2009 HD touring models as well as 2010-13 Road Kings and Ultra classics. ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters. Wiring instructions included.
***THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT.
IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN ORDER THE RUN, TURN, BRAKE MODULE WITHOUT THE HARNESS. THAT MODULE CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.
We also offer taillight modules for the same applications listed above but WITHOUT a rear fender harness for $50.00 less. You will have to re-use your stock rear fender harness with those modules. Taillight modules for 2010-2013 Street Glide and Road Glide models available as well. See our other listings for these. If you need a module for a CVO model please call the shop.
MADE WITH PRIDE IN THE USA!!!
Learn More
NATIVE Fender spacers for STOCK STYLE Fork Legs
$49.95
***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***
If you have STOCK STYLE fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the STOCK STYLE fender mounts perfectly. We offer these spacers in FOUR different widths and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as 1984-2013 HD touring models. We also make fender spacers for aftermarket billet style fork legs which can be found in another listing.
Please see the menus below for choices.
***SHIPPING IS ONLY $6. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
If you have STOCK STYLE fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the STOCK STYLE fender mounts perfectly. We offer these spacers in FOUR different widths and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as 1984-2013 HD touring models. We also make fender spacers for aftermarket billet style fork legs which can be found in another listing.
Please see the menus below for choices.
***SHIPPING IS ONLY $6. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
Arlen Ness Hot Legs
$769.95
Arlen Ness Hot Legs for Bagger Models in single disc and dual disc versions.
• The tapered billet design features a hidden axle that drastically cleans up the front end of your FLT Bagger
• Offered in single left disc - single caliper, or dual disc style in Deep Cut or smooth. Chrome or Black
• Available for 2000-present applications
• Ness fork boot covers are available separately to give the ultimate in appearance
• Sold in Pairs
Learn More
• The tapered billet design features a hidden axle that drastically cleans up the front end of your FLT Bagger
• Offered in single left disc - single caliper, or dual disc style in Deep Cut or smooth. Chrome or Black
• Available for 2000-present applications
• Ness fork boot covers are available separately to give the ultimate in appearance
• Sold in Pairs
Learn More
NATIVE Fender spacers for Arlen Ness Fork Legs. Chrome or Black.
$59.95
***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***
If you have American Suspension or Arlen Ness billet fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the Arlen Ness Hot Legs and the EARLY STYLE American Suspension bagger legs fender mounts perfectly. (These do not fit the late style American Suspension fork legs that use studs w nuts to attach the fender mount to the fork leg) You will have a even gap around the rectangular portion of the fender mount. We offer these spacers in FOUR different widths, and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as all 1984-2013 HD touring models. We also make fender spacers for stock style legs which can be found in another listing.
***SHIPPING IS ONLY $7. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
Please see the menus below for choices.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
If you have American Suspension or Arlen Ness billet fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the Arlen Ness Hot Legs and the EARLY STYLE American Suspension bagger legs fender mounts perfectly. (These do not fit the late style American Suspension fork legs that use studs w nuts to attach the fender mount to the fork leg) You will have a even gap around the rectangular portion of the fender mount. We offer these spacers in FOUR different widths, and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as all 1984-2013 HD touring models. We also make fender spacers for stock style legs which can be found in another listing.
***SHIPPING IS ONLY $7. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
Please see the menus below for choices.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
Native Run, Turn, Brake Module with Harness for 2010-2013 Street Glide and Road Glide
$149.95
This AMERICAN MADE taillight module INCLUDES A 36" LONG REAR FENDER HARNESS to simplify your rear fender wiring. It will make single or dual function lights work as running, turn, and brake lights and also includes a 36" lead to power your license plate light. It is a direct plug in installation into the main wiring harness. This unit also has a built in load equalizer that will not overheat like the cheap imported modules. This direct plug module fits 2010-2013 HD Street Glides and Road Glides. Wiring instructions included.
*** THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT. IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN CALL OUR SHOP TO ORDER. WE CAN PROVIDE YOU WITH A SPECIAL MODULE THAT CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.
Taillight modules for older touring models as well as 2010-2013 Road Kings and Ultra models available as well. See our other listings for these. If you need a module for a CVO model please call the shop. 269-276-9200
MADE WITH PRIDE IN THE USA!!!
Learn More
*** THIS MODULE WITH A HARNESS WILL PROVIDE ALL 3 FUNCTIONS TO ANY LIGHT YOU HOOK TO IT. IF YOU PLAN TO RUN ANY ADDITIONAL DEDICATED BRAKE OR RUNNING LIGHTS THEN CALL OUR SHOP TO ORDER. WE CAN PROVIDE YOU WITH A SPECIAL MODULE THAT CAN ALSO POWER YOUR STOCK BRAKE AND RUNNING LIGHTS.
Taillight modules for older touring models as well as 2010-2013 Road Kings and Ultra models available as well. See our other listings for these. If you need a module for a CVO model please call the shop. 269-276-9200
MADE WITH PRIDE IN THE USA!!!
Learn More
Native Stainless Steel Flush Axles
$139.95
For only a few bucks you can clean up the looks of your STOCK fork legs with this trick AMERICAN MADE flush front axle. This Native STAINLESS STEEL 25mm flush axle is available with chrome or gloss black ends for the 2008-present HD touring models. A installation tool is included along with instructions as well. Please choose your axle end cap finish from the menu below.
Learn More
Learn More
Performance Machine Fork Legs
$799.95
After over 40 years of bolting PM calipers to stock front fork legs PM has developed a superior set of lower legs to compliment their wheels and braking systems. Artfully sculpted from heat treated billet aluminum, machined PM icon logo with a pin-stripe detail that extends the length of the forks, and a hidden axle design all add up to the perfect set of legs. Combine with our Native billet aluminum slider covers for a great front end. Kit contains axle, axle covers, left and right legs with caliper and fender mounts installed. (THESE LEGS USE STOCK STYLE FENDER SPACERS) Caliper mounts will accommodate stock HD calipers, HHI or PM Calipers for single or dual disc. Applications available for 2000-present HD touring models.
We are trying to keep these legs in stock but sometimes we run out so please call to make sure the legs you want are in stock.
Learn More
We are trying to keep these legs in stock but sometimes we run out so please call to make sure the legs you want are in stock.
Learn More
S curve stretched saddlebags,1 inch front to 3 inch rear stretch
$999.00
These bags are called S-Curve because the bottom edge of the bag is shorter in the front than it is in the back of the bag. This bag is 1" deeper in the front and 3" deeper in the rear of the bag than a stock bag. This length of bag is a perfect match for the stock STREET GLIDE fender! The S-curve shape of the bottom follows the contour of the curved body line in the side of the bag. Available with dual, single, or no exhaust cutouts and with the curved body line or a stock style straight body line on the side of the bag.
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
Included is a pair of saddlebag bottoms (only) with carpeted insides and "false" removable interior floor panels to separate the very bottoms of the bags from the upper areas. You can use your stock saddlebag lids and hardware or we can supply those as well.
These bags are vacuum injected fiberglass. Meaning that the resin is forced though the fiberglass. Nothing is hand layed! These bags are very strong (1/4'' thick) and light (5 to 7 lbs), to insure these are the best parts you can buy on the bagger market today. These bags are very straight! Your painter will love you for choosing these bags and he will show it by not charging you as much for prep work!
Please choose your options from the menus below.
*Please allow 3-5 days for us to customize these bags to your specs before we ship*
MADE WITH PRIDE IN THE USA!
Learn More
Native 18 inch 180mm Pitbull EASY Front Tire Kit for 1986-2013
$599.95
Native has been installing 18" 180mm (7.25" wide) front tires on the HD touring models for 13 years now. Therefore we have the most experience and offer the most complete well thought out kit available.
This is our least expensive wide front tire kit. The 180mm Pitbull "EASY" front tire kit for the 1986-2013 Harley Baggers.
Our Native EASY wide tire kit:
- DOES NOT require a triple tree change.
- Allows for installation of the WIDEST 18" 180mm tire available. (7.25")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that fits perfect every time and is the BEST quality available. Our STEEL fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such excellent quality with a beautiful finish ready to scuff and prime.
- Allows you to choose from hundreds of wheels styles that we can supply to you.
- Uses a very common size 180/55-18 tire that is readily available around the country.
Our standard EASY kit includes:
Our original Native brand American made one piece stamped steel laser cut OG wrap or HALFBREED wrap style fender & custom cut slider covers in a RAW metal finish.
Benefits of the EASY kit are:
• No triple tree change required.
• No fork leg or brake modifications required. Ok w single or dual disc, abs or non abs.
• Allows for installation of a 180mm (7.25") wide tire.
• Chrome or gloss black slider covers are available at additional cost.
You can choose from 5 different fender styles and 3 different finish options in the menus below. If you click on the circle next to the options you want the website will total the price for you.
***THE MAJOR DIFFERENCE of this EASY kit vs our more expensive PRO kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. Our PRO kit includes trees that move the fork legs farther apart so you can run a full sided fender without a notch.
Our 180mm "PRO" wide front tire kits for 1994-2013 HD touring models ($1595) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.
MADE IN USA!
Learn More
This is our least expensive wide front tire kit. The 180mm Pitbull "EASY" front tire kit for the 1986-2013 Harley Baggers.
Our Native EASY wide tire kit:
- DOES NOT require a triple tree change.
- Allows for installation of the WIDEST 18" 180mm tire available. (7.25")
- Will provide a smoother ride than even a stock front end.
- Will handle awesome, including in corners.
- Will help protect your wheel from pothole damage.
- Is a completely BOLT-ON kit that maintains stock front end rake.
- Includes our Native brand AMERICAN MADE 14g STAMPED STEEL LASER CUT fender that fits perfect every time and is the BEST quality available. Our STEEL fenders are covered by our LIFETIME STRUCTURAL WARRANTY!
- Saves you money at the painter because the fender is such excellent quality with a beautiful finish ready to scuff and prime.
- Allows you to choose from hundreds of wheels styles that we can supply to you.
- Uses a very common size 180/55-18 tire that is readily available around the country.
Our standard EASY kit includes:
Our original Native brand American made one piece stamped steel laser cut OG wrap or HALFBREED wrap style fender & custom cut slider covers in a RAW metal finish.
Benefits of the EASY kit are:
• No triple tree change required.
• No fork leg or brake modifications required. Ok w single or dual disc, abs or non abs.
• Allows for installation of a 180mm (7.25") wide tire.
• Chrome or gloss black slider covers are available at additional cost.
You can choose from 5 different fender styles and 3 different finish options in the menus below. If you click on the circle next to the options you want the website will total the price for you.
***THE MAJOR DIFFERENCE of this EASY kit vs our more expensive PRO kit is that the fender in the EASY kit is notched to go around the fork leg so there is NO FENDER MATERIAL between the tire and the fork leg. Our PRO kit includes trees that move the fork legs farther apart so you can run a full sided fender without a notch.
Our 180mm "PRO" wide front tire kits for 1994-2013 HD touring models ($1595) and 180mm wide front tire kits for 2014-present touring models ($899.95) are also available on this website. Please check out those listings on the home page of this website and then call our shop if you need additional info or if you'd like to order. 269-276-9200. If you would us to email you information about WHEELS AND TIRES for these kits please email us at Paul@NativeCustomBaggers.com or through the contact button on our home page.
MADE IN USA!
Learn More
| 15 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
