-
Category: Suspension -
Price: $0.00 - $1,000.00
Search results for 'application'
| 6 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
NATIVE Fender spacers for STOCK STYLE Fork Legs
$49.95
***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***
If you have STOCK STYLE fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the STOCK STYLE fender mounts perfectly. We offer these spacers in FOUR different widths and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as 1984-2013 HD touring models. We also make fender spacers for aftermarket billet style fork legs which can be found in another listing.
Please see the menus below for choices.
***SHIPPING IS ONLY $6. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
If you have STOCK STYLE fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the STOCK STYLE fender mounts perfectly. We offer these spacers in FOUR different widths and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as 1984-2013 HD touring models. We also make fender spacers for aftermarket billet style fork legs which can be found in another listing.
Please see the menus below for choices.
***SHIPPING IS ONLY $6. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
NATIVE Fender spacers for Arlen Ness Fork Legs. Chrome or Black.
$59.95
***THESE SPACERS DO NOT FIT 2014 AND LATER TOURING MODELS***
If you have American Suspension or Arlen Ness billet fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the Arlen Ness Hot Legs and the EARLY STYLE American Suspension bagger legs fender mounts perfectly. (These do not fit the late style American Suspension fork legs that use studs w nuts to attach the fender mount to the fork leg) You will have a even gap around the rectangular portion of the fender mount. We offer these spacers in FOUR different widths, and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as all 1984-2013 HD touring models. We also make fender spacers for stock style legs which can be found in another listing.
***SHIPPING IS ONLY $7. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
Please see the menus below for choices.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
If you have American Suspension or Arlen Ness billet fork legs and a custom fender on your 1984-2013 HD touring model, then you have just found the ultimate fender spacer for your application. These fender spacers will work with most 16-30" fenders. Native Customs has designed these billet aluminum fender spacers to match the contour of the Arlen Ness Hot Legs and the EARLY STYLE American Suspension bagger legs fender mounts perfectly. (These do not fit the late style American Suspension fork legs that use studs w nuts to attach the fender mount to the fork leg) You will have a even gap around the rectangular portion of the fender mount. We offer these spacers in FOUR different widths, and in your choice of show chrome, gloss black powdercoat, or in raw machined aluminum. All of these spacers have holes on 3.000" centers which is the same pattern as all 1984-2013 HD touring models. We also make fender spacers for stock style legs which can be found in another listing.
***SHIPPING IS ONLY $7. IF THE WEBSITE CHARGES YOU MORE WE WILL REFUND THE DIFFERENCE.
Please see the menus below for choices.
MADE WITH PRIDE IN MICHIGAN!!!
Learn More
HHI 6 Piston Front Brake Calipers for 13 inch rotor applications - BLACK
$479.00
THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
We have the BLACK 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
We have the BLACK 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
Performance Machine Fork Legs
$799.95
After over 40 years of bolting PM calipers to stock front fork legs PM has developed a superior set of lower legs to compliment their wheels and braking systems. Artfully sculpted from heat treated billet aluminum, machined PM icon logo with a pin-stripe detail that extends the length of the forks, and a hidden axle design all add up to the perfect set of legs. Combine with our Native billet aluminum slider covers for a great front end. Kit contains axle, axle covers, left and right legs with caliper and fender mounts installed. (THESE LEGS USE STOCK STYLE FENDER SPACERS) Caliper mounts will accommodate stock HD calipers, HHI or PM Calipers for single or dual disc. Applications available for 2000-present HD touring models.
We are trying to keep these legs in stock but sometimes we run out so please call to make sure the legs you want are in stock.
Learn More
We are trying to keep these legs in stock but sometimes we run out so please call to make sure the legs you want are in stock.
Learn More
Arlen Ness Hot Legs
$769.95
Arlen Ness Hot Legs for Bagger Models in single disc and dual disc versions.
• The tapered billet design features a hidden axle that drastically cleans up the front end of your FLT Bagger
• Offered in single left disc - single caliper, or dual disc style in Deep Cut or smooth. Chrome or Black
• Available for 2000-present applications
• Ness fork boot covers are available separately to give the ultimate in appearance
• Sold in Pairs
Learn More
• The tapered billet design features a hidden axle that drastically cleans up the front end of your FLT Bagger
• Offered in single left disc - single caliper, or dual disc style in Deep Cut or smooth. Chrome or Black
• Available for 2000-present applications
• Ness fork boot covers are available separately to give the ultimate in appearance
• Sold in Pairs
Learn More
HHI 6 Piston Front Brake Calipers for 13 inch rotor applications - CHROME
$479.00
THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
We have the CHROME 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
We have the CHROME 6-piston differential bore calipers for 13" rotor applications IN STOCK and ready to ship. These calipers are engineered for maximum braking performance and show quality looks. They have no ugly company logos machined into them so they are smooth and beautiful, and they come with dual stainless steel bleeders standard.
They are manufactured from 6061 billet aluminum which provides a stronger more rigid caliper with less weight as compared to stock and some competitors cast calipers. These differential bore calipers utilize a smaller diameter piston at the lead-in of the rotor and a larger piston on the trailing side providing optimum friction dynamics by equalizing the heat distribution throughout the brake pad to rotor interface. HHI also employs dual piston seals providing each piston with 2 layers of protection from contamination promoting long term leak proof operation. In addition, this sealing system improves piston pullback which reduces brake pad drag on the rotor.
Further improvements have been made with specially designed permanent brake pad retainers providing quiet operation and an upgraded friction material promoting longer life and less pad dust. All calipers come complete with brake pads, mounting hardware, 10mm banjo bolt and crush washers for easy installation. HHI calipers are also compatible with DOT 4 or DOT 5 brake fluid.
***THESE CALIPERS THAT WE HAVE IN STOCK FIT ALL 2000-PRESENT HD TOURING MODELS W 13" BRAKE ROTORS. THESE ARE FOR FRONT SINGLE DISC APPLICATIONS ON THE LEFT SIDE.
MADE WITH PRIDE IN THE USA!!!
Learn More
| 6 Item(s) | Show per page |
| View as: Grid List | Sort by: Relevance| Name| Price |
