Skip to Store Area:

  • | Unique Parts For Harley Davidson Touring Motorcycles (Baggers)

Native Custom Baggers

Search Site

Bagger tail for single exhaust on 2006.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Bagger tail with dual cut-outs.
  • Bagger tail fender that we cut short to work with stock length bags.
  • Billet taillight / turn signal / license plate mount included with both style fenders.
  • Bagger tail for single exhaust on 2006.
  • Bagger tail for single exhaust on 2006.
  • Bagger tail for single exhaust on 2006.

Arlen Ness Rear Fender

 

This BAGGER TAIL rear fender from Arlen Ness is the best fitting fender of this style that we have ever installed! IT DOES NOT INSTALL OVER YOUR STOCK FENDER so you can run up to a 200mm tire underneath it. This composite fender comes with a billet taillight / license plate mount that has integrated turn signals in the tips of the cateye light. It also comes with a steel support frame that replaces some of the stock rear fender support brackets. This sturdy support frame ensures that the fender won't flex and vibrate. It's a very well engineered kit!

This fender is not designed to be used with backrests and tour packs, but with a little fabrication it can be done. Call for details. If you want to run a stock HD backrest with this fender on 97-08 models, you will have to bend the backrest legs apart, drill two holes in the backrest plates, and eliminate the quick release latches on the backrest since this fender is wider than the stock one. Feel free to give us a call for details.
This fender is available with single, dual, or no exhaust cut-outs. The single and no cut-out options are more $ because this fender comes out of the mold with dual exhaust cut-outs. When you order it with single or no cut-outs they have to be filled in, which is labor intensive.

New Bagger-Tailâ„¢ fenders from Arlen Ness are a direct replacement for the factory fender on 1997 - present FLT models
Pre-drilled bolt-on fenders give your bike a clean unique look while filling in the gap between the fender and saddlebags.
Fenders can be used with either a stock width rear tire or up to a 200mm tire. (We offer a twistgear primary offset kit for 2006 and earlier FLT's which is required to install a 200 mm tire on the 5 speed models. You can find more info on this primary offset kit in the drivetrain section of this website.)

This fender comes complete with a Ness license/taillight assembly WITH TURN SIGNALS IN THE TIPS OF THE CATEYE TAILLIGHT that plugs into the factory harness for a no hassle installation.
We recommend using the Bagger-Tailâ„¢ fender kit with any of our extended saddlebags or saddlebag extensions or with stock saddlebags if you trim the length to match. This fender can be easily trimmed to any length. We did this on the red bike in the pics.

This is a special order item and usually takes 5 days before it will ship.

MADE WITH PRIDE IN THE USA!!!



Email to a Friend

Be the first to review this product

$699.00

* Required Fields

$699.00
Add Items to Cart Add to Cart