Skip to Store Area:

  • | Unique Parts For Harley Davidson Touring Motorcycles (Baggers)

Native Custom Baggers

Search Site

Native STEEL fender w 3" S-Curve bags. Notice the custom trim on the bottom of the fillers.

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • This product is made with pride in the U.S.A.! Do your part to help put Americans back to work and get this economy rolling strong again by buying American made goods whenever possible.
  • Native STEEL fender w 4.5" bags
  • Native's billet illuminated license plate frame w hidden hardware
  • Native STEEL fender w 4.5" bags
  • Native STEEL fender w 4.5" S-Curve bags
  • Native STEEL fender w 4.5" S-Curve bags
  • All the factory HD docking hardware works with our fender!
  • Native STEEL fender w 4.5" S-Curve bags
  • Native STEEL fender w 3" S-Curve bags. Notice the custom trim on the bottom of the fillers.
  • Native STEEL fender w 3" S-Curve bags. Notice the custom trim on the bottom of the fillers.
  • Native STEEL fender w 3" S-Curve bags. Notice the custom trim on the bottom of the fillers.

NATIVE Stretched STEEL Rear Fenders for 2009-Present HD Touring


These ALL STEEL, stretched rear fenders are available with or without a recess for the license plate and line up great with stretched bags up to 5" long. They are STOCK WIDTH and can accept a 200mm tire. These fenders are AMERICAN MADE from 14g STEEL and have all the mounting holes laser cut so they are ready to bolt on. The steel lower filler panels offered here are a Native Customs original design and mate perfectly with the factory HD strut covers. Our fillers are actually rounded at the top and go UNDER the strut cover on 09-13 baggers so you don't see the upper end of the filler panel. Fillers for 2014-15 baggers overlap the strut cover. While we do use the Klockwerks stamped fenders, they are lasered to NATIVE'S specs so our fender SITS ABOUT 1" LOWER than a Klockwerks fender and we designed our own custom welded on lower filler panels to give you a one piece fender and filler combo with MORE OPTIONS than the other ONE.


IMPORTANT NOTE: We modify these Klockwerks fenders WE sell (for no extra charge) to make your installation easier and to save you aggravation and $ down the road. We go the extra mile with attention to detail that shows in the finished product! For example; these fenders don't have the license plate holes in them from Klockwerks, but if you purchase a fender with a recess for the plate and buy the license plate frame at the same time, we will measure and drill the fender to accept our license plate frame, thus saving you the hassle! We also remove some material from the inside of the fender around the seat nut insert so that your factory HD insert will fit. If this isn't done the insert won't fit and you may not realize this until after your fender is painted! Give us a call and we'll explain. You'll be glad you bought from Native Customs!

If you choose to add OUR lower filler panels, they will be welded on to the fender. This will allow your painter to mold them in to the fender for the ultimate seamless look, or our we can mold them for a added fee.

Our optional steel LOWER filler panels are available for stock or stretched saddlebags and with or without l.e.d. lights. If you choose to add the l.e.d. lights to the fillers you will get a super bright 8" tall x .625" wide double row l.e.d. installed in each filler panel. These lights are available as totally flush or chrome or black bezeled and can function as running, brake, and turn lights when used with our optional (American made) taillight module available below. The totally flush lights require extra prep work by your painter or ours (this option available below) and get clear coated when painting so they will be glass smooth when done properly. The chrome or black bezeled l.e.d.'s do not require any additional prep to the fillers before painting. Our own unique illuminated license plate frame is available in chrome or black. Please CLICK on the options you would like in the menus below to see your final price.

Our stretched rear fenders are also available in stock or +1" width for 180mm tires sfor 97-08 Touring. Please call the shop or see our other listing for these and for Klockwerks front fenders too!

*NOTE - If you order saddlebags and this fender from us and specify single or dual STANDARD SIZE cutouts the filler and saddlebag openings WILL MATCH, otherwise the fiiller panels for single or dual exhaust will have small cut-outs in the filler panels that are just large enough to clear your exhaust, so you will have to install the fender on the bike and make the final exhaust cut-outs to match your saddlebag exhaust openings before sending it to paint. This will ensure that your filler exhaust opening perfectly matches your saddlebag opening. Fitting every body part before paint is the proper way to build a bike!

**NOTE - Because our fender sits lower than stock fenders the following applies: Most 2 up seats with flexible plastic pans will fit this fender. Some 2 up seats with fiberglass pans will also fit but may require a little modification. 2 up seats with steel pans may not fit. Most all solo seats will fit fine with our fender. Also, you can run the stock 180/65-16 rear tire along with a shock with a minimum collapsed length of 9.75" and not have any tire to fender clearance issues.


Email to a Friend

Be the first to review this product


* Required Fields

Add Items to Cart Add to Cart