Skip to Store Area:

  • | Unique Parts For Harley Davidson Touring Motorcycles (Baggers)

Native Custom Baggers

Search Site

180 fender w recess plate on our silver "Pit"

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • This product is made with pride in the U.S.A.! Do your part to help put Americans back to work and get this economy rolling strong again by buying American made goods whenever possible.
  • 180 fender w recess plate on our silver "Pit"
  • 180 fender w recess plate on our silver "Pit"
  • 180 fender w recess plate on our silver "Pit"
  • Here you can see the INCLUDED chrome "bullets" that come with our kit to fill the voids in the ends of the factory strut covers.
  • Smooth 180 rear fender on our "Pitbull Bagger"
  • Smooth 180 rear fender on our "Pitbull Bagger"
  • Smooth 180 rear fender on our "Pitbull Bagger"
  • Smooth 180 rear fender on our "Pitbull Bagger"
  • Smooth 180 rear fender on our "Pitbull Bagger"
  • Native 180 rear fender with optional 2" diameter Shooter led lights in fillers and Native illuminated plate frame.
  • These L.E.D.'s are super bright! STOCK WIDTH FENDER SHOWN HERE

NATIVE WIDE STEEL Rear Fenders TO FIT 180MM TIRES for 97-08 Baggers

 

***THESE REAR FENDERS ALLOW YOU TO RUN UP TO A 180MM REAR TIRE***

***THE BASE PRICE IS FOR THE FENDER AND HARDWARE KIT ONLY. FILLER PANELS AND LIGHTS ADD ADDITIONAL COST***

These LIMITED PRODUCTION ALL STEEL, stretched rear fenders are available in any stretch up to 6" over stock and only with a recess for the license plate. The 2.5" stretch works well with stock length bags and the 6" is just a little longer than 4 or 4.5" stretch bags. All the fenders in the pics are 6" stretch. They are 8.25" wide and fit between the stock frame struts. These one piece stamped fenders are AMERICAN MADE from 14g STEEL and have all the mounting holes laser cut so they are ready to bolt on. The OPTIONAL steel lower filler panels offered here are a Native Customs original design. If you choose to ADD our lower filler panels, they will be welded on to the fender. This will allow your painter to mold them in to the fender for the ultimate seamless look, or our we can mold them for a added fee.

Our optional steel filler panels are available for stock or stretched saddlebags and with or without l.e.d. lights. If you choose to add the l.e.d. lights to the fillers you will get a super bright 8" tall x .625" wide double row l.e.d. installed in each filler panel. These lights are available as totally flush or chrome or black bezeled and can function as running, brake, and turn lights when used with our optional (American made) taillight module available below. The totally flush lights require extra prep work by your painter or ours (this option available below) and get clear coated when painting so they will be glass smooth when done properly. The chrome or black bezeled l.e.d.'s do not require any additional prep to the fillers before painting. We offer illuminated license plate frames to fit this fender in either chrome or black finishes. Please CLICK on the options you would like in the menus below to see your final price.

HARDWARE KIT IS INCLUDED:
The base price of this fender includes a well thought out hardware kit that is necessary to mount this fender. It comes with special laser cut, welded and powder coated brackets and all hardware as well. One example of the planning that went into this kit is that the new U-shaped bracket that connects the saddlebag rails together and bolts into the tail of the fender is adjustable so that you can adjust your saddlebag / filler panel gaps. The bolts that show are even chrome plated! :-)

Optional hardware for installing a HD backrest is available and provides adjustable tilting of the backrest.

We offer stretched steel rear fenders in stock width for 97-present baggers as well. See other listings.

*NOTE - Filler panels with the mock up cutout option for single or dual exhaust will have small cut-outs in the filler panels that are just large enough to clear your exhaust, so you will have to install the fender on the bike and make the final exhaust cut-outs to match your saddlebag exhaust openings before sending it to paint. This will ensure that your filler panel exhaust opening matches your saddlebag opening. Regardless of which way you go, fitting every body part before paint is the proper way to build a bike!

MADE WITH PRIDE IN THE USA!

Email to a Friend

Be the first to review this product

$559.95

* Required Fields

$559.95
Add Items to Cart Add to Cart