 |
Lowered front fenders for Baggers – This will give you the look of a slammed hot rod! It will also give you more clearance between the fender and bottom triple tree to avoid denting your fender when you hit a huge pothole. We start with original HD fenders and weld in our laser cut fender brackets. This lowers the fender over an inch lower than stock and brings the front of the fender down so it’s parallel with the ground. It also eliminates the stock rivets, which leaves the fender sides totally smooth. Available for 16-18”, & 21” wheels in the clean or trimmed out version. 87-present dressers.
Cost: 229.00 – 239.00
|
 |
Bracket kit to lower your front fender – This kit allows you to lower your own front fender to save some cash. The end result is the same fender as listed above. This is a weld in kit, and when finished, the sides of your fender will be smooth and rivet free, just like ours. The kit comes with two thick steel laser cut brackets, chrome spacers, stainless steel mounting hardware, and instructions. Kits are available for 16-18”, and 21” front wheels. 87-present dressers.
Cost: 59.00
|
|
 |
Stretched and / or smooth rear fenders – Our totally smooth, all steel rear fenders are available in stock, 8”, or 11” widths. They can be ordered either stock length or stretched. With a smooth fender you are rid of the obtrusive stock lighting and can choose any taillight you wish. Run a flush L.E.D. light in the fender or just run one flush L.E.D. light in each bag and leave the fender smooth and beautiful except for the license plate. We offer a flush license plate mount that mounts very easily and is very clean.
From: 259.00
|
|
 |
Flush L.E.D. taillights – We offer both flush and chrome bezeled L.E.D. taillights. The flush ones are totally flush with the surrounding surface and require repainting of whatever you put them in. The chrome bezeled L.E.D.’s only protrude about .375” above the surface, but don’t require repainting of your part. This can save you hundreds, especially if you have a custom paint job. We can install either kind if you don’t want to tackle the job yourself. Both versions are available in several shapes.
Prices start at: 100.00 each
|
|
 |
Custom bullet style front signals – These chrome front signals really clean up the front ends of the Road Kings and the Electra Glides, especially when removing the spot lamp assemblies. The detachable windshield can still be run with these beauties. These are single element halogen lights, but they are brighter than most l.e.d.’s! Being halogen means they won’t require a load equalizer. They have mirrored lenses, which shows when they are off. Mounting studs and instructions are included.
Cost: 125.00
|
|
 |
Single disc fork legs – We offer a set of chrome single disc fork legs to convert your bagger to single disc. This conversion will allow you to really show off that custom front wheel. We start with original HD fork legs and remove the right side caliper mount and finish it by hand. After the super high quality chrome job, you can’t tell there was ever a caliper mount on there. One of the late model stock calipers will do a fine job of stopping your scooter, but if you’re worried, we offer beautiful HHI brake calipers.
The fork legs fit all 2000 and later dressers and sell for 325.00.
|
|
 |
HHI brake calipers – We offer both the 4 & 6-piston chrome, polished, or black anodized HHI calipers. These calipers have no ugly company logos machined into them. They are smooth and beautiful, and come with dual stainless steel bleeders! They come with organic pads that are easy on polished stainless rotors, but can be ordered with semi-metallic pads for ultimate stopping power. They are available direct bolt on for 1984- present models and for rear applications too. And to top it all off, they are priced well below that other brand that puts their logo on all their calipers and wants you to Pay More too.
Our 4 – pistons are priced from: 269.00
|
|
 |
The ULTIMATE backrest – This is the best backrest we have ever used! This very unique backrest actually serves EITHER the driver OR passenger. This unit pivots forward and back with the push of a button in seconds. Its quick detach as well. The pad pivots so it moves with you for total comfort. These ULTIMATE backrests come with a black pad and are available in either chrome steel or chrome billet aluminum. A matching luggage rack that mounts to, and pivots with the backrest is also available.
Cost: 329.00 – 369.00
|
|
 |
Bassani True Dual exhaust – Almost every bagger we sell has this exhaust system on it. The header pipes are equal length for equal backpressure to each cylinder. The gradual, less severe bends of the rear pipe create less heat than stock or other pipes with sharp bends. You exhaust note will also be more pronounced. You can hear each cylinder fire more clearly. Also, with less restrictive exhaust comes increased horsepower and torque. You can run any muffler that would fit your stock system.
Cost: 419.00 (well below retail)
|
|
 |
Flush front axle – We offer a flush front
axle for the 2000 and later touring models in both 1” and .750” diameters. The .750” is for adapting a softail wheel to the dressers when converting to our single disc front end. The left side has a chrome button head bolt, and the right side has a push in flush chrome cap. It’s a very clean look.
Cost: 99.00
|
|
 |
Original NCB flamed floorboards and pegs – Our floorboards hug the contours of the primary and exhaust perfectly. The boards are carved from billet aluminum and then covered in chrome. The non-skid surface is incredibly durable. The increased length makes for very comfortable foot positioning. The sculptured pegs are cut from stainless steel and polished to a mirror finish. Being polished instead of chrome allows for simple re-polishing if they ever get scratched. Matching highway and passenger pegs available soon, just like the boards.
|
|
 |
Detachable fairing w/ “The System” – Quadzilla fairings offer contemporary styling and premium quality. Finished in durable Black Gel coat. Both inner and outer shells are made of true hand laid fiberglass. What does that mean for you? True hand laid fiberglass is glass mat and resin laid by hand (not chopper gun). This gives you a better glass to resin ratio and more strength to weight than plastic. This detachable fairing has the following features:
200 watt Eclipse brand AM FM CD MP3-CD Sirius compatible radio and FOUR 5" marine speakers for great sound at any speed with any pipes!
Optional Sirius decoder/antenna can be ordered built into your fairing.
These fairings integrate with your OEM windshield mounts and use a quick-detach power cord to go on or off your bike in less than 5 minutes.
Includes your choice of a 5" dark or light tint, 8" light tint, or 5", 8", 10", 12", or 15" clear windshield.
Concealed internal antenna for a clean, uncluttered appearance.
Weather door and internal shielding to protect the radio from water.
Superb wind protection and great audio with a classic appearance.
Made of hand laid fiberglass. Stronger than ABS plastic and only 20 lbs. complete.
Finished in gloss black gelcoat, ready for your painter.
Retails at: 1599.00 / Our price is currently: 1449.00.
|
